Journal Publications

1. M. Moghimi Zand, M.T. Ahmadian. “Dynamic pull-in instability of electrostatically actuated beams incorporating Casimir and van derWaals forces”, PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, DOI: 10.1243/09544062JMES1716 (2011).

2. T. Pirbodaghi, M.Fesanghary, M.T.Ahmadian. “Non-linear vibration analysis of laminated composite plates resting on non-linear elastic foundations”, Journal of the Franklin Institute, 348 (2011) 353–368.

3. Mohammad Motamedi, Mohammad Taghi Ahmadian, Gholamreza Vossoughi, Seyed Mehdi Rezaei, Mohammad Zareinejad. “Adaptive sliding mode control of a piezo-actuated bilateral teleoperated micromanipulation system”, Precision Engineering, 35 (2011) 309–317.

4. M. Asghari, M. Rahaeifard, M.H. Kahrobaiyan, M.T. Ahmadian.” The modified couple stress functionally graded Timoshenko beam formulation”, Materials & Design (2010).

5. M.H. Kahrobaiyan, M.T.Ahmadian, P.Haghighi, A.Haghighi. “Sensitivity and resonant frequency of an AFM with sidewall and top-surface probes for both flexural and torsional modes”, International Journal of Mechanical Sciences, 52 (2010) 1357–1365.

6. M. Asghari, M.H. Kahrobaiyan, M.T. Ahmadian. “A nonlinear Timoshenko beam formulation based on the modified couple stress theory”, International Journal of Engineering Science. 48 (2010) 1749–1761.

7. M. Asghari, M.T. Ahmadian, M.H. Kahrobaiyan, M. Rahaeifard, “On the size-dependent behavior of functionally graded micro-beams”, Materials and Design 31 (2010) 2324–2329.

8. M.H. Kahrobaiyan, M. Asghari, M. Rahaeifard, M.T. Ahmadian, “Investigation of the size-dependent dynamic characteristics of atomic force microscope microcantilevers based on the modified couple stress theory”, International Journal of Engineering Science 48 (2010) 1985–1994.

9. M. Moghimi Zand, B. Rashidian, M.T. Ahmadian, “Contact Time Study of Electrostatically Actuated Microsystems”, Journal of Sciatica Iranica, Transaction B: Mechanical Engineering, Vol. 17, No. 5,(2010) pp. 348-357.

10. M. Ehramianpour1, H. Haddadpour, M. T. Ahmadian, “Aeroelastic behavior of a slender body considering free fittings†”, Journal of Mechanical Science and Technology, 24 (9) (2010) 1755-1762.

11. Hamed Moradi, Firooz Bakhtiari-Nejad, Mohammad R. Movahhedy, Mohammad T. Ahmadian, “Nonlinear behaviour of the regenerative chatter in turning process with a worn tool: Forced oscillation and stability analysis”, Journal of Mechanism and Machine Theory, 45 (2010) 1050–1066.

12. R. Sharifi Sedeh, M.T. Ahmadian, F. Janabi-Sharifi. “Modeling, Simulation, and Optimal Initiation Planning For Needle Insertion into the Liver”, JOURNAL OF BIOMECHANICAL ENGINEERING-TRANSACTIONS OF THE ASME, 132, 041001 (2010).

13. M. Mojahedi, M. Moghimi Zand, M.T. Ahmadian. “Static pull-in analysis of electrostatically actuated microbeams using homotopy perturbation method”, Applied Mathematical Modeling, 34 (2010) 1032–1041.

14. S.A. Tajalli, M. Moghimi Zand, M.T. Ahmadian. “Effect of geometric nonlinearity on dynamic pull-in behavior of coupled-domain microstructures based on classical and shear deformation plate theories”, European Journal of Mechanics A/Solids, 28 (2009) 916–925.

15. S.H. Hoseini, T. Pirbodaghi, M.T. Ahmadian, G.H. Farrahi. “On the large amplitude free vibrations of tapered beams: an analytical approach”, Mechanics Research Communications, 36 (2009) 892–897.

16. M. MoghimiZand, M.T.Ahmadian, B.Rashidian. “Semi-analytic solutions to nonlinear vibrations of microbeams under suddenly applied voltages”, Journal of Sound and Vibration, 325 (2009) 382–396.

17. A.Sakhaee-Pour, M.T.Ahmadian, A.Vafa. “Vibrational analysis of single-walled carbon nanotubes using beam element”, Thin-Walled Structures, 47 (2009) 646–652.

18. Mahdi Moghimi Zand, Mohammad Taghi Ahmadian. “Application of homotopy analysis method in studying dynamic pull-in instability of Microsystems”, Mechanics Research Communications, Volume 36, Issue 7, October 2009, Pages 851-858.

19. Mahdi MojahediHamid Moeenfard, Mohammad T. Ahmadian, “A New Efficient Approach for Modeling and Simulation of Nano-Switches under the Combined Effects of Intermolecular Surface Forces and Electrostatic Actuation”, International Journal of Applied Mechanic, Vol. 1, No. 2 (2009) 349–365.

20. M.T. Ahmadian, H.A. Borhan, E. Esmailzadeh. “Dynamic analysis of geometrically nonlinear and electrostatically actuated micro-beams”, COMMUNICATIONS IN NONLINEAR SCIENCE AND NUMERICAL SIMULATION, 14 (2009) 1627-1645.

21. T. Pirbodaghi, S.H. Hoseini, M.T. Ahmadian, G.H. Farrahi. “Duffing equations with cubic and quintic nonlinearities”, Computers and Mathematics with Applications, 3 (2009) 500-506.

22. S. Ramezani, M.T. Ahmadian. “Free Vibration Analysis of Rotating Laminated Cylindrical Shells Under Different Boundry Conditions using a Combination of the Layerwise Theory and Wave Propagation Approach”, Scientia Iranica, Scientia Iranica, vol. 16, No. 2, pp 168-176, Sharif University of Technology, April 2009.

23. Sakhaee-Pour, M.T. Ahmadian, A. Vafai. “Potential application of single-layered graphene sheet as strain sensor”, Solid State Communications, 147 (2008) 336–340.

24. M.T. Ahmadian, M. Moghimi Zand. “vibrational analysis of electrostatically actuated microstructures considering nonlinear effects”, COMMUNICATIONS IN NONLINEAR SCIENCE AND NUMERICAL SIMULATION, Volume 14, Issue 4, April 2009, Pages 1664-1678.

25. T. Pirbodaghi, M.T. Ahmadian, M Fesanghary. “On the homotopy analysis method for non-linear vibration of beams”, MECHANICS RESEARCH COMMUNICATIONS, Volume 36, Issue 2, March 2009, Pages 143-148.

26. R.A. Jafari Talookolaei, M.H. Kargarnovin, M.T. Ahmadian, '' Free Vibration Analysis of Cross-Ply Layered Composite Beams with Finite Length on Elastic Foundation'', International Journal of Computational Methods (IJCM), Vol. 5, No. 1 (2008) 21-36.

27. S.H. Hoseini, T. Pirbodaghi, M. Asghari, G.H. Farrahi, M.T. Ahmadian. “Nonlinear free vibration of conservative oscillators with inertia and static type cubic nonlinearities using homotopy analysis method”, Journal of Sound and Vibration, 316 (2008) 263–273.

28. M.T. Ahmadian, M. Bonakdar. “A new cylindrical element formulation and its application to structural analysis of laminated hollow cylinders”, Finite Elements in Analysis and Design, Volume 44, Issue 9-10 (June 2008), 617-630.

29. A Sakhaee-Pour, M T Ahmadian, R Naghdabadi. “Vibrational analysis of single-layered graphene sheets”, Nanotechnology, 19 (2008) 085702 (7pp).

30. Sakhaee-Pour, M.T. Ahmadian, A. Vafai. “Applications of single-layered graphene sheets as mass sensors and atomistic dust detectors”, SOLID STATE COMMUNICATIONS, (2008) 168-172.

31. M.T. Ahmadian, R.A. Jafari Talookolaei, E. Esmailzadeh. “Dynamic of a laminated composite beam on pasternak-viscoelastic foundation subjected to a moving oscillator”, JOURNAL OF VIBRATION AND CONTROL (2008) VOL 14; NUMB 6, pages 807-830.

32. M.T. Ahmadian, G.R. Vossoughi, Ramezani. “Dynamic Error Analysis of Gentry Type Coordinate Measuring Machines”, Scientia Iranica, Scientia Iranica (2007), Vol. 14, No. 3, pp 278-290.

33. M.T. Ahmadian, R.A. Jafari Talookolaei. “A new approach in finite element modeling of generally laminated composite beams”, Journal of Computer Science, 3(1):51-56, 2007.

34. M.T. Ahmadian, M. Moghimi Zand. “Characterization of coupled-domain multi layer microplates in pull-in phenomenon, vibrations and dynamics”, INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, Volume 49, Issue 11, November 2007, Pages 1226-1237.

35. M.T. Ahmadian, R. Sharifi Sedeh, R. Abdollah Pour. “A NONLINEAR VISCOELASTIC MODELING OF BRAIN AND CSF DEFORMATION UNDER TUMOR EXPANSION”, International Journal of Scientific Research (IJSR), vol. 16 (2006) 425-428.

36. M.T. Ahmadian, A.A. Nikooyan. “MODELING AND PREDICTION OF SOFT TISSUE DIRECTIONAL STIFFNESS USING IN-VITRO FORCEDISPLACEMENT DATA”, International Journal of Scientific Research (IJSR), 16 (2006) 385-389.

37. M.T. Ahmadian, R. S. Sedeh, R. Abdollahpour, S.S. Sedeh, K. Navi. “Application of car active suspension in vertical acceleration reduction of vehicle due to road excitation and its effect on humanhealth”, International Journal of Scientific Research (IJSR), 16 (2006) 429-434.

38. M.T. Ahmadian, R. AbdollahPour, R.S. Sedeh and M. Movahedi. “EFFECT OF TUMOR LOCATION AND ITS GROWTH ON STRESS DISTRIBUTION IN THE BRAIN”, International Journal of Scientific Research (IJSR), 16 (2006) 523-528.

39. M.T. Ahmadian, H Borhan. “Dynamic modeling of geometrically nonlinear electrically actuated micro beams (corotational finite element formulation and analysis)”, Journal of Physics: Conference Series, 34 (2006) 606-613.

40. M. T. Ahmadian, Amin Mehrabian. “Design optimization by numerical characterization of fluid flow through the valveless diffuser micropumps”, Journal of Physics: Conference Series 34 (2006) 379-384.

41. M.T. Ahmadian, G.R. Vossoughi, S. Ramezani. “Free Vibration Analysis of Gantry Type Coordinate Measuring Machines”, Scientia Iranica 13 (2006) 206-216.

42. H. Mohammadi, M.T. Ahmadian, W.K. Wan. “Time-dependent analysis of leaflets in mechanical aortic bileaflet heart valves in closing phase using the finite strip method”, Medical Engineering & Physics, 28 (2005) 122–133.

43. S.M.H. Mirbagheri, R. Babaei, M. Dadashzadeh, M.T. Ahmadian, P. Davami. “Simulation of Mould Filling in the EPC Process”, Scientia Iranica, vol. 11, Nos. 1&2, pp 69-80, Sharif University of Technology, April 2004.

44. M. T. AHMADIAN, M. S. ZANGENEH. “APPLICATION OF SUPER ELEMENTS TO FREE VIBRATION ANALYSIS OF LAMINATED STIFFENED PLATES”, Journal of Sound and Vibration (2003), 259(5), 1243–1252.

45. M.T. Ahmadian*, M. Sherafati Zangeneh. “Vibration analysis of orthotropic rectangular plates using superelements”, Computer Methods in the Applied Mechanics and Engineering, 191 (2002) 2069–2075.