MSc Theses
1.
Structure
of Length Scales and Their Modeling in
Turbulent Flow Fields (1993)
2.
Flow
Simulation around Radial Gates (1993)
3.
Applying
the Multi-Zonal Algorithm to the Finite Volume Code and Flow Simulation around
Slide Gate (1993)
4.
Numerical
Analysis of Turbulent Reacting Flow in A Cylinder of A Spark Ignition Engine
(1994)
5.
Implementation
of Three-Dimensional RSM into CALC-BFC (1994)
6.
Determination
of Heat Transfer Coefficient in An Expanding Jet Interacting with a Wall (1994)
7.
Investigation
of heat transfer characteristics in an oxygenrator
(1995)
8.
Investigation
of Fluid flow characteristics in a combustion chamber of solid fuel rocket
engine (1995)
9.
Investigation
of flow characteristics in a venture-type
duct (1996)
10.
Analysis
of blood flow in branches and its effect
on wall thickness of the vanes (1996)
11.
Numerical
Investigation of Two Dimensional Turbulent Fluid Flow Characteristics in
Y-Branches (1997)
12.
Investigation
of physical parameters on the geometry of tumors in the hyperthermia process
(1997)
13.
Boiler
simulation of Shahid Rajaei
thermal power station (1997)
14.
Heat
transfer modeling in biological tissues in cryosurgery (1998)
15.
The
effects of wind on the performance of the dry cooling towers (1998)
16.
Numerical
investigation of three-dimensional turbulent flow in a suction and discharge
stages of a two-valve cylinder (1998)
17.
Numerical
investigation of three-dimensional turbulent flow in compression and combustion
stages of a Peycan engine (1998)
18.
Exergy analysis of thermal power plants (1999)
19.
Investigation
of laser thermal effects on hairs using finite-element methods (1999)
20.
Designing
a new automotive thermal system in an non-electric incubator (2000)
21.
Investigating
the performance of two-layers turbulent models in different geometries (2000)
22.
Optimization
of a two polar fuel cell (2000)
23.
Numerical
investigation of flow characteristics around an inlet valve of ICE (2001)
24.
Investigation
of fluid flow characteristics in the Nissan engine manifold (2001)
25.
Simulation
of velocity and temperature fields and optimization of radiation of light bulbs
in an RTP system and tracking the surface temperature of wafers using TITO
phase controller (2001)
26.
Determination
of the impact of CNG engine and turbochargers (2002)
27.
Investigation
of the effects of the physical and mechanical properties of prose media on the
water management of a PEM fuel cell (2002)
28.
Designing
a test rig for testing the radial hydrodynamic seals (2003)
29.
Numerical
investigation of fluid flow and heat transfer characteristics in rotating tube
with axial temperature difference (2003)
30.
Minimization
of effluent production and water
consumption in a pulp and paper industry using pinch technology (2003)
31.
Implementation
of V2F modified turbulent model into CALC-BFC (2004)
32.
Development
of multi block computer code for flow analysis in turbomachineries
(2004)
33.
Numerical
investigation of heat transfer characteristics in a jet interacting with a
isothermal wall (2004)
34.
Numerical
solution of a 2-d flow in prose media of fuel cells (2004)
35.
Numerical
investigation of turbulent reacting flow in the engine of a Pride motor car
(2004)
36.
Designing
a bi-fuel (gasoil and LNG) diesel engine. Hori Jafari (2005)
37.
Numerical
investigation of a jet characteristic in a semi-closed container using
two-layer turbulent model. Memarian (2005)
38.
Designing,
cost and risk analysis of
an LNG pumping station. Meibodi (2005)
39.
Experimental
investigation of a free jet flow characteristics with triangular cross-section
using hot wire anemometer. Omid Bakhsh
(2005)
40.
Numerical
Investigation of heat transfer and pressure drop of condensation inside
herringbone-type plate heat exchanger. Mohsen Akbari (2005)
41.
Software
development for simulation of thermal performance of windows. Jamaati (2005)
42.
Designing
and constructing a heat pipe for electronic cooling applications. Mahtab Roshan (2005)
43.
Modeling
of petrol consumption during next 20 years. Barati (2005)
44.
Numerical
investigation of fluid flow characteristics in triangular cross section jet . Farshid Bagheri
(2005)
45.
Heat
conduction in two & three dimesions: computer
modeling of building physics applications. Mehrjo
(2005)
46.
The
effect of applying magnetic particles in cathode electro catalyst on PEM fuel
cell performance. Mitra Maghsoodi
(2005)
47.
Two
dimensional analysis of friction loss of flow with microbubble
in rectangular channel with random vortex method. Setareh
Sekhavat (2005)
48.
Theoretical
and experimental investigation of flow in the engine intake manifold, Armin EmamiFar (2006)
49.
Numerical
investigation of heat transfer and fluid flow characteristics in a partially
heated rotating cylinder, Reza madahian (2006)
50.
Numerical
investigation of heat transfer and fluid flow characteristics in a heat
exchanger wrapped around an electro-motor, Mohamad Niknami Esfehani (2007)
51.
Numerical
investigation of turbulent swirling flow with solid particles through a
separator gas cyclone, Hamid Abbasi (2007)