Home || Education || Areas of Interest || Industrial Experience || Teaching Experience || Appointment || Professional Memberships || Workshops || Publi cations

 Gallery || Contact   

 

In English

                        Journals

      Conference

book chapters

Journals

 

Mehdi Behzad, Amirmasoud Kiakojouri, Hesam Addin Arghand, Ali Davoodabadi " Inaccessible rolling bearing diagnosis using a novel criterion for Morlet wavelet optimization" Journal of Vibration and control, 2020

1

 Mehdi Behzad, Sajjad Feizhoseini, Hessam Addin Arghand, Ali Davoodabadi, David Mba " Failure Threshold Determination of Rolling Element BearingsUsing Vibration Fluctuation and Failure Modes " Journal of Applied Sciences, 2020

2

Mehdi Behzad, Amirhosen Mollaali, Motahare Mirfarah, Hesam Addin Arghand " Investigation on the effects of measurement and temporal uncertainties on rolling element bearings prognostics " Journal of Theoretical and Applied Vibration and Acoustics 6(1) 1-16 (2020)

3

 Abuzar Abazari,Mehdi Alvandi,Mehdi Behzad,Krish P Thiagarajan"Vortex shedding modes around oscillating non-uniform doubleheave plates" Journal of Engineering for the Maritime environment, 2020

4

Mehdi Behzad, Ali Davoodabadi, Hessam Addin Arghand" Prognostics of Rolling Element Bearings Using Shock Pulse Method and Vibration Method Records and Employing feedforward neural-network"Amirkabir Journal of Mechanical Engineering.2020

5

Mehdi Behzad,Ali Davoodabadi,Hessam addin Arghand " Using shok pluse method for early fault detection of rolling element bearing and comparing with vibration envelope technique" impress.

6

 Mehdi Behzad, Mehdi Alvandi " Friction- induced backward rub of rotors in non-annular clearance:Experimental obsevrations and numerial analysis " Journal of Tribology international, 152, 2020 - 106430

7

Abuzar Abazari, Mehdi Alvandi, Mehdi Behzad, Krish Thiagarajan " Hydrodynamic Damping Enhancement by Implementing a Novel Combined Rigid-Elastic Heave Plate " Journal of Marins Science and Technology , 732, 2020 In Press

8

M.Hosseini Yazdi, M.Behzad, B.Ghodrati and S.Khodaygan " Prognostic of Rolling element bearings based on early-stage developing faults " International Journal of Comadem, Vol 23, No 1 2020, Page: 55

9

Amirhossein Mollaali, Mehdi Behzad, Motahareh Mirfarah " A New Methodology to Deal with the Multi-Phase Degradation in Rolling Element Bearing Prognostics" The 32th International Congress and Exhibition on Condition Diagnostic Engineering Management. COMADEM 2019 Huddersfield, WestYorkshire, UK

10

Abuzar Abazari, Mehdi Behzad, Krish Thiagarajan " Hydrodynamic performance of multiple co- axial heave plates with different diameters" Journal of Ship and Offshore Structures, ISSN: 1754-212X, 2019

11

Masoud Behzad, Heetaei Kim, Mehdi Behzad, Hadi Asghari Behambari " Improving sustainability performance of heating facilities in a central boiler room by condition-based maintenance " journal of Cleaner Production Vol. 206, 2019, 713-723

12

Mehdi Behzad1, Hesam Addin Arghand1 and Abbas Rohani Bastami " Remaining useful life prediction of ball-bearings based on high-frequency vibration features " Mechanical Engineering Science, Proceedings of the Institution of Mechanical Engineers Part C [PIC] - In press

13

M.Behzad,H.Darvish Gohari,A.A.mohammadi Dehabadi " Vibration Effect on Electrical Resistance Fluctuations in Electrical Connectors" Engineering Solid Mechanics- 2017 In Press

14

Amin Ghadami, Mehdi Behzad, Hamid Reza Mirdamadi " Damage identification in multi-step waveguides using Lamb waves and scattering coefficients " Archive of Applied Mechanics 2017- In press

15

Saman Momeni, Abolghassem Zabihollah, Mehdi Behzad " Development of an accurate finite element model for N-layer MR-laminated beams using a layerwise theory" Journal of Mechanics of Advanced Materials and Structures, 2017

16

Jalil. Naji, Abolghasem Zabihollah, Mehdi. Behzad " Vibration behavior of laminated composite beams integrated with magnetorheological fluid layer " journal of mechanics, 2016

17

Jalil. Naji, Abolghasem Zabihollah, Mehdi. Behzad " Vibration characteristics of laminated composite beams with magnetorheological layer using layerwise theory " Journal of mechanics of advanced materials and structure, 2016

18

Jalil. Naji, Abolghasem Zabihollah, Mehdi. Behzad " Layerwise theory in modeling of magnetorheological laminated beams and identification of magnetorheological fluid " mechanics research communication. 2016, 50-59

19

S.M Darbandi, A. Habibollahi, M. Behzad "Sensor Runout Compensation in Active Magnetic Bearings via an Integral Adaptive Observer" journal of  Control Engineering Practice  volume 48 · January 2016

20

Alireza Ebrahimi, Mahdi Heydari, Mehdi Behzad " Optimal vibration control of rotors with an open edge crack using an   electromagnetic actuator " Journal of Vibration and Control, 2016, 1-23

21

Mohammad M Rezaei, Mehdi Behzad, Hamed Moradi, Hassan Haddadpour "Modal-based damage identification for the nonlinear model of modern wind turbine blade " Renewable Energy, 2016, Page 391-409

22

Mohammad M. Rezaei, Mehdi Behzad, Hassan Haddadpour, Hamed Moradi  " Development of a reduced order model for nonlinear analysis of the wind turbine blade dynamics" Renewable Energy, 76 (2015) 264-282

23

Amin Ghadami, Mehdi Behzad,Hamidreza Mirdamadi " A mode conversion-based algorithm for detecting rectangular notch parameters in plates using Lamb waves" Archived of applied mechanics, 17 February 2015

24

Siamak Akhshik, Mehdi Behzad, "CFD-DEM Simulation of Hole Cleaning Process in a Deviated Well Drilling via Multi-sphere Method and Rolling Resistance Technique" Journal of Mechanical Science and Technology , 2015, Page 1261-1271

25

  Siamak  Akhshik, Mehdi Behzad, Majid Rajabi " CFD–DEM Model for Simulation of Non-spherical Particles in Hole Cleanin Process "Journal of Particulate Science and Technology, 2015, pp. 472-481

26

Siamak Akhshik, Mehdi Behzad, Majid Rajabi " CFD-DEM simulation of the hole cleaning process in the deviated well  drilling: the effects of particle shape " Particuology, 2015, Page 11

27

Siamak Akhshik, Mehdi Behzad, Majid Rajabi "CFD-DEM approach to investigate  the effect of drill pipe rotation on cutting transport behavior " Journal of petroleum science and engineering, 2015, Volume 127, pp.2  

28

H. Heydari, A. Ebrahimi, M. Behzad " Continuous model for flexural vibration analysis of a Timoshenko cracked beam" Journal Archive of mechanic, 2013, Vol.65, No.4, pp. 265-288.

29

M. Behzad, A. Ebrahimi, H. Heydari, M. Asadi, A. Alasti " Experimental investigation on   the fault diagnosis of permanent magnet DC electromotor" Journal of Insight, 2013, Vol.55, No.8, pp. 422-427(6).

30

SM Jafari, H Mehdigholi, M Behzad "Investigation of the relationship between engine valve leakage and acoustic emission measured on the cylinder head ignoring combustion effects" Journal of Mechanical Engineering, In Press.

31

Majid Rajabi, Mehdi Behzad "On the contribution of circumferential resonance modes in acoustic radiation force experienced by cylindrical shells" Journal of Sound and Vibration, 2014, Volume 333, Issue 21, pp. 5746–5761

32

Majid Rajabi, Mehdi Behzad " Interaction of a plane progressive sound wave with anisotropic cylindrical shells" Composite Structures, 2014, Volume 116, pp. 747–760

33

S.M. Darbandi, M. Behzad, H. Salarieh, H. Mehdigholi " Linear Output  Feedback Control of a Three-Pole Active Magnetic Bearing" Ieee/Asme Transactions on Mechatronics, In Press.

34

S.M. Jafari, H. Mehdigholi and M. Behzad "Valve fault diagnosis in internal combustion engines using acoustic emission and artificial neural network" Shock and Vibration, In Press.

35

Mehdi Behzad, Mehdi Alvandi, David Mba, Jalil Jamali "A finite element-based algorithm for rubbing induced vibration prediction in rotors" Journal of Sound and Vibration, 2013, Volume 332, Issue 21, pp. 5523-55442.

36

Majid Rajabi, Mehdi Behzad "An exploration in acoustic radiation force experienced by cylindrical shells via resonance scattering theory" Ultrasonics, 2013, Volume 54, Issue 4, pp. 971-980.

37

Mehdi Behzad, Hamid Reza Mirdamadi,Amin Ghadami " Guided Wave Propagation in Stepped Beams" 21st Conference on Mechanical Engineering, 2013.

38

H. Heydari, A. Ebrahimi, M. Behzad " Continuous model for flexural vibration analysis of a Timoshenko cracked beam" Journal Archive of mechanic, 2013, Vol.65, No.4, pp. 265-288.

39

M. Behzad, A. Ebrahimi, H. Heydari, M. Asadi, A. Alasti " Experimental investigation on   the fault diagnosis of permanent magnet DC electromotor" Journal of Insight, 2013, Vol.55, No.8, pp. 422-427(6).

40

M. Behzad, A. Ghadami, A. Maghsoodi, J.Michael Hale " Vibration based      algorithm for  crack detection in cantilever beam containing two different types of cracks" Journal of Sound and Vibration Published , 2013, Volume 332, Issue 24, pp. 1- 9.

41

Majid Rajabi, Mehdi Behzad "Point Source Simulated Acoustic Radiation of Cylindrical Shells: Resonance and Background Fields" The Journal of the European Acoustic Association(EAA), 2013, Vol.100, pp. 215-225.

42

M. Behzad, A. R. Bastami, D. Mba, Rolling Bearing Fault Detection by Short-time Statistical Features, Journal of Process Mechanical Engineering Published (IMechH), 10.1177/0954408911422635, 2011.

43

H. Rafezi, M. Behzad, J. Akbari, Time Domain and Frequency Spectrum Analysis of Sound Signal for Drill Wear Detection, Procedia Engineering, 2011, article in press.

44

H. Mehdigholi, H. Mirzaei Rafsanjani, M. Behzad, “Estimation of Rolling Bearing Life With Damage Curve Approach”, Polish Maritime Research, Vol. 18, No. 3, pp. 66-70, 10.2478/v10012-011-0019-6, 2011.

45

M. Behzad, A. Rohani Bastami, A New Method for Detection of Rolling Bearing Faults Based on the Local Curve Roughness Approach, Polish Maritime Research, Vol. 18, No. 2, pp. 44-50, 10.2478/v10012-011-0011-1, 2011.

46

M. Heydari, H. Salarieh, M. Behzad, Stochastic Chaos Synchronization Using Unscented Kalman-Bucy Filter and Sliding Mode Control, Mathematics and Computers in Simulation Journal, January 2011, article in press.

47

M. Behzad, A. Rohani Bastami, D. Mba, A New Model for Estimating Vibrations Generated in the Defective Rolling Element Bearings”, Journal of Vibration and Acoustics, Vol. 133, August 2011.

48

M. Behzad, A. Ebrahimi and A. Meghdari, "A Continuous Vibration Theory for Beams with a Vertical Edge Crack", International Journal of Science & Technology, Vol. 17, No. 3, PP. 194-204, May-June 2010.

49

M. F. Mahyari, M. Behzad, G. R. Rashed, "Drill String Instability Reduction by Optimum Positioning of Stabilizers", Journal of Mechanical Engineering Science, Vol. 224, PP. 647-653, DOI: 10.1243/09544062JMES1566, 2010.

50

M. Behzad, M. Asayesh, "Numerical and Experimental Investigation of the Vibration of Rotors with Loose Disks", Journal of Mechanical Engineering Science, Vol. 224, PP. 85-94, DOI: 10.1243/09544062JMES1345, 2010.

51

M. Behzad, A. Rohani Bastami, D. Mba, B. Eftekhamejad and B. Chamley, "Defect size estimation in rolling element bearings using vibration time waveform", Journal of Insight, Vol. 51, No. 8, August 2009.

52

M. Behzad, A. Meghdari, A. Ebrahimi, "A Linear Theory for Bending Stress-Strain Analysis of a Beam with an Edge Crack", Journal of Engineering Fracture Mechanics. No. 16, Vol. 75, PP. 4695-4705, 2008.

53

M. Behzad, A. Ebrahimi, A. Meghdari, "A New Continuous Model for Flexural Vibration Analysis of a Cracked Beam", Journal of Polish Maritime Research, No. 2, Vol. 15, PP. 32-39, 2008.

54

A. Roshan-Ghias, M.B. Shamsollahi, M. Mobed, M. Behzad, "Estimation of Modal Parameters Using Bilinear Joint Time-Frequency Distributions", Journal of Mechanical Systems and Signal Processing, Vol. 21, PP. 2125-2136, July, 2007

55

H. N. Pishkenari, M. Behzad, A. Meghdari, "Nonlinear Dynamic Analysis of Atomic Force Microscopy under Deterministic and Random Excitation", Journal of Chaos, Solitons and Fractals, Vol. 37, No.3, PP. 748-762, 2008

56

M. Behzad, H. Salarieh, A. Alasty, "Chaos Synchronization in Noisy Environment Using Nonlinear Filtering and Sliding Mode Control", Journal of Chaos, Solitons and Fractals, Vol.36 , No. 5, PP. 1295-1304, 2008

57

M. Behzad, M. Hodaei, I. Alimohammadi, "Experimental and numerical investigation of the effect of a speed bump on car noise emission level", Journal of Applied Acoustics, Vol. 68, No. 11-12, PP. 1346-1356, 2007

58

M. Behzad, H. Salarieh, A. Alasty, "Chaos Synchronization in Noisy Environment Using Nonlinear Filtering and Sliding Mode Control", Journal of Chaos, Solitons and Fractals, Vol.36 , No. 5, PP. 1295-1304, 2008

59

M. Behzad, M. Akbari, "Experimental Investigation on Response & Efficiency of Moored Pontoon Type Floating Breakwaters", Iranian Journal of Science and Technology, Vol. 31, No. B1, PP. 95-99, 2007

60

M. Behzad, A.R. Ghias, "Time-Frequency Feature Extraction of a Cracked Shaft Using an Adaptive Kernel", Journal of Applied Mechanics and Materials Series, Vols. 5-6, PP. 37-44, September 2006, Switzerland

61

I. Alimohammadi, P. Nassiri, M. Behzad and M.R. Hoseini, "Reliability Analysis of Traffic Noise Estimation in Highways of Tehran by Monte Carlo Simulation Method", Iranian Journal of Environmental Health Science & Engineering, Vol. 2, N. 4, PP. 229-236, 2005

62

M. Behzad, A. Meghdari, A. Ebrahimi, "A New Approach for Vibration Analysis of a Cracked Beam", International Journal of Engineering, Vol. 18, No. 4, November 2005, pp. 319-330

63

A. S. Ghafari, M. Behzad, "Investigation of the micro-step control positioning system performance affected by random input signals", Journal of Mechatronics, Vol. 5, Issue 10, December 2005, PP. 1175-1189

64

M. Behzad, M. Tajvidi, Gh. Ebrahimi, R. H. Falk, "Dynamic Mechanical Analysis (DMA) of Compatibilizer effect on the Mechanical Properties of Wood Flour-High-Density Polythylene Composites", International Journal of Engineering, Vol. 17, No. 1, pp. 95-104, 2004

65

M. Behzad, A. R. Bastami, "Effect of Centrifugal Force on Natural Frequency of Lateral Vibration of Rotating Shafts", Journal of Sound and Vibration, PP. 985-995, Vol. 274/3-5, 2004.

66

M. Behzad, M. Asayesh, "Vibration Analysis of Rotating Shaft With Loose Disk" International Journal of Eng. Vol. 15, No. 4, Dec. 2002, PP. 385-393.

67

M. Behzad, M. Asayesh, "Steam Turbine Misalignment Detection by Vibration Analysis", Journal of electrical Science and technology Vol. 13 No. 2, Feb, 2001 PP. 47-53.

68

M. Behzad, M.R. Hoseini, H. Salmasi, M. Asayesh, "Fault Diagnosis In Two Industrial Applications By Vibration Analysis", Proceeding of IMEC 2004 Volume (V) PP. 591-603, Kuwait, 5-8 Dec. 2004

69

Conference

UP

Fateme Hosseinpour, M. Behzad, Enrico Zio “ Model- based prognostic of the remaining usuful life of bearings considering model parameter uncertainty30th Europian safty reliability conference and The 15th Probabilistic Safety Assessment and management conference

1

M. Hosseini Yazdi, M. Behzad, B. Ghodrati and S. Khodaygan " Prognostic of Rolling element bearings based on failure modes” 14th International Physical Asset Management Conference, 2019.

3

Morteza Hosseini Yazdi, Mehdi Behzad, Behzad Ghodrati, Amir Taghizadeh Vahed " Experimental Study of Rolling Element Bearing Failure Pattern Based on Vibration Growth Process " 29th European Safety and Reliability Conference.

4

Mehdi Behzad, Abuzar Abazari, Krish Thiagarajan " Experimental and numerical investigation on the hydrodynamic performance of multiple co- axial heave plates" 2th International Workshop on Marine Hydrodynamics Modelling Conference, 2019, Harbin, China

5

Saman Momeni, Abolghassem Zabihollah, Mehdi Behzad " Experimental Works on dynamic behavior of Laminated Composite Beam Incorporated with magnetorheological fluid under Random Excitation" The 3rd International Conference of Mechatronics and Robotics (ICMRE 2017) in paris

6

Mehdi Behzad, Elahe Talebi ahooie " An Innovative Approach to Optimize the Remaining Useful Life Prediction of Mechanical Assets" 12th Condition Monitoring and Fault Diagnosis Conference, 27-28 February 2018

7

Mehdi Behzad, Heetae Kim, Masoud Behzad, Hadi Asghari Behambari  " An Investigation on Life Cycle Assessment of a Central" 4th Environmental Planning and Management Conference, 23-24 May 2017

8

Mehdi Behzad, Heetae Kim, Masoud Behzad, Hadi Asghari Behambari " An Investigation on Life Cycle Assessment of a Central Mechanical Room in Office Buildings: A Case Study "4th Environmental planning and Management Conference,    23-24 May 2017

9

Saman Momeni, Abolghassem Zabihollah, Mehdi Behzad " Experimental Works on dynamic behavior of Laminated Composite Beam Incorporated with magnetorheological fluid under Random Excitation" The 3rd International Conference of Mechatronics and Robotics (ICMRE 2017) in paris

10

M.Behzad, M. Alvandi "Rubbing vibration behavior between rotors and compliant- segmented stators" international conference on condition monitoring and machinery failure prevention technologies. 2016

11

M.Behzad, A.Rohani, B.Amirani, N.Shahabian, Y.Hamidi, M.R.Deilami,  "Torsional Vibration Analysis and Reduction in  Reciprocating Turbo Compressor"    12th international conference on condition monitoring and machinery failure prevention technology 2015

12

1-    Mehdi Behzad, Hamid Reza Mirdamadi,Amin Ghadami " Guided Wave Propagation in Stepped Beams" 21st Conference on Mechanical Engineering, 2013

13

M. Behzad, A. Toomaj, H. Mehdigholi, Vibration Analysis of Rod Fastened Rotors with several Tie-Rods Considering Contact Effect in Stack of Disks, 1st International Conference on Acoustics and Vibration, ISAV 2011, p. 47, 2011.

14

H. Rafezi, J. Akbari, M. Behzad, Time domain and frequency spectrum analysis of sound signal for drill wear detection, 3rd International Conference on Signal Acquisition and Processing (ICSAP 2011), PP. 32-36, February 26-28, Singapore, 2011.

15

M. Behzad, M. Rajabi, F. Meisami, Finite Element Modeling and Vibration Analysis of Tie-Bolted Rotors, 5th Condition Monitoring and Faults Diagnosis Conference (CMFD 2011), 1389.

16

H. Mansour, M. Behzad, "An Experimental Study to Find The Acoustic Quality Indicators of Mulberry Wood", 2010 ASME International Mechanical Engineering Congress and Expositions, IMECE2010, Nov. 12-18, Vancouver, British Columbia, CANACA, 2010.

17

M. Behzad, A. Ebrahimi, S. N. Oskouie, H. Massoumi, "Experimental and Numerical Investigation on the Effect of Blade Number on Vibration of Industrial Fans", Condition Monitoring and Diagnostic Engineering Management, COMADEM 2010, PP. 473-480, June 28-July 2, Nara, Japan, 2010.

18

M. Behzad, H. Moeenfard, M.T. Ahmadian, "Application of the Extended Kantorovich Method to the Vibrational Analysis of Electrically Actuated Micro plates", International Mechanical Engineering Congress & Exposion, IMECE2009, November 13-19, Lake Buena Vista, Florida, USA, 2009.

19

H. Mansour, A. Kasaiezadeh, S. Arzanpour, M. Behzad, "Finite Element Modeling of Setar, a Stringed Musical Instrument", International Mechanical Engineering Congress & Exposion, IMECE2009, November 13-19, Lake Buena Vista, Florida, USA, 2009.

20

H. Mansour, S. Arzanpour, H. Alghassi, M. Behzad, "Vibration Analysis of Setar for Extracting the Frequency Response Fuction (FRF)", International Mechanical Engineering Congress & Exposion, IMECE2009, November 13-19, Lake Buena Vista, Florida, USA, 2009.

21

H. Mansour, S. Arzanpour, H. Alghassi, M. Behzad, "An Experimental Investigation on the Bridge Effect in Sound Produced by Setar", International Mechanical Engineering Congress & Exposion, IMECE2009, November 13-19, Lake Buena Vista, Florida, USA, 2009.

22

S. Jolghazi, H. Mehdigholi, M. Behzad, "Attenuation of Random Vibration in Plates", AES-TEMA' 2009 Fourth International Conference, PP. 57-63, Hamburg, Germany, September 01-04, 2009.

23

M. Behzad, A. Alandi Hallaj, H. M. Rafsanjani, A. R. Bastami, H. M. Rafsanjani, "Common Failure Modes of Electro-Pumps inIndustries", 3rd Condition Monitoring & Fault Diagnosis Conference (CMFD2009), PP. 547-554, Iran, 1-3 Mar. 2009.

24

M. Behzad, M. Golestani, A. R. Bastami, H. M. Rafsanjani, "Vibration Analysis of Main Mill Electromotor in Momtazan Cement Plant", 3rd Condition Monitoring & Fault Diagnosis Conference (CMFD2009), PP. 513-520, Iran, 1-3 Mar. 2009.

25

M. Behzad, A. Alandi Hallaj, "The Use of Level Crossing Rate for Estimation of Bearing Defect Size", 3rd Condition Monitoring & Fault Diagnosis Conference (CMFD2009), PP. 502-512, Iran, 1-3 Mar. 2009.

26

M. Behzad, A. Alandi Hallaj, "Necessity of Condition Monitoring for Estimating the Residual Lifetime of Rolling Element Bearings", 3rd Condition Monitoring & Fault Diagnosis Conference (CMFD2009), PP. 492-501, Iran, 1-3 Mar. 2009.

27

M. Behzad, A. AlandiHallaj, A. Ebrahimi, R. Rahnama, "The Effect of Structural Changes on Silo Quake: A Case Study", 4th International Conference on Energy Research & Development (ICERD-4), 17-19 Novermber 2008, State of Kuwait.

28

 M. Behzad, A. R. Bastami, "Concept of Roughness of Vibration in Rolling Bearings Diagnosis", International Conference on Noise and Vibration Engineering, ISMA 2008, PP. 1937-1949, Katholieke Universiteit Leuven, Belguim, 15-17 September 2008.

29

M. Dyanati, H.S. Sayyaddi, M. Behzad, "Detection of Damaged Area in Fixed Offshore Platforms Using Vibration Characteristics", OCEANS’08 Conference, Japan, 2008.

30

M. Behzad, A. AlandiHallaj, A. Ebrahimi, "Vibration Reduction of a Variable Speed Fan Structure: A Case Study", 21st International Congress on Condition Monitoring and Diagnostic Engineering Management, COMADEM 2008, PP. 63-71, Prague, Czech Republic, June 11-13, 2008

31

M. Masjedi, M.R. Movahhedy and M. Behzad, "Dynamic Analysis of High Speed Spindles Based on a Simplified Model for Angular Contact Bearings", Tehran International Congress on Manufacturing Engineering (TICME 2007), December 10-13, 2007, Tehran, Iran

32

S. M. Tabatabaei, R. Farshidi, M. Behzad, "A New Approach to Estimate Bit Bearing Life", Middle East Mechanical Engineering Conference and Expo, MEMEC 2007, November 4-7, 2007, Manama, Kingdom of Bahrain

33

M. Behzad, M. Samadi, A. Mobini, "Bent Shaft Characteristic Determination Using Run-Up Vibration Data and Neural Networks", 20th International Congress Condition Monitoring and Diagnostic Engineering Management, COMADEM 2007

34

M. Behzad, A.R. Ebrahimi, H. Safaeifar, "Failure Analysis of a Boiler Feed Water Pump", 20th International Congress Condition Monitoring and Diagnostic Engineering Management, COMADEM 2007

35

M. Behzad, A.R. Ghias, "Vibration Analysis of Cracked Rotors During Run-Up Using Wavelet Transform", 15th International Conference on Mechanical Engineering, ISME 2007, PP. 115-116, Tehran, Iran, May 15-17, 2007

36

M. Roshan-Ghias, M. Mobed, M. B. Shamsollahi, M. Behzad, "Modal Parameters Identification Using Bilinear Joint Time-Frequency Analysis", International Conference on Noise and Vibration Engineering, PP. 2907-2920, Katholieke Universiteit Leuven, Belgium, 2006

37

Hassan Sayyaadi, Mehdi Behzad, Omid Kazemi, "Active Vibration Control of Flexible Structures using LQG Adaptive Feed Forward Controll", IASTED International Conference on Modeling, Identification, and Control (MIC2006), February, 2006, Lanzarote, Canary Islands

38

H.N. Pishkenari, M. Behzad and A. Meghdari, "Nonlinear Dynamic Analysis of Atomic Force Microscopy under Deterministic and Random Excitation", International Mechanical Engineering Congress and Exposition, IMECE 2006, November 5-10, 2006, Chicago, lllinois, USA

39

O. Kazemi, H. Sayyaadi, M. Behzad, "Optimal Feedback-Adaptive Feed forward Controller for Vibration Suppression of a Cantilever Beam Using Piezo-actuators", 8th Biennial ASME Conference on Engineering Systems Design and Analysis, ESDA 2006, July 4-7, 2006, Torino, Italy

40

M. Behzad, A. Montazeri, A. Ebrahimi, "Machine Failure Time Prediction Considering Vibration Data", 19th International Congress, COMADEM 2006, PP. 545-554, Lulea, Sweden, 12-15 June 2006

41

M. Behzad, A. Meghdari, A. Ebrahimi, "A Continuous Model for Forced Vibration Analysis of a Cracked Beam", 2005 ASME International Mechanical Engineering Congress and Exposition, IMECE 2005, PP. 1-7, Orlando, Florida USA, 5-11 November 2005

42

M. Behzad, A. Ghasemloonia, "Engine Knock Detection by Vibration Monitoring", 18th International Congrees Condition Monitoring and Diagnostic Engineering Management, COMADEM 2005, PP. 153-163, Cranfield University, UK, 31st Aug.-2nd Sep. 2005

43

M. Behzad, M. R. Hoseini, A. R. Bastami, "Practical Blade Vibration Analysis Using the Results of Free-Free Modal Test", 18th International Congrees Condition Monitoring and Diagnostic Engineering Management, COMADEM 2005, PP. 335-341, Cranfield University, UK, 31st Aug.-2nd Sep. 2005

44

M. Behzad, P. Hejazi Dinan, M. Rasolzadeh, F. Farahmand, "A 3 Dimensional Modeling of Human Body Under Vertical and Horizontal Vibration", 13th Nordic Baltic Conference on Biomedical Engineering and Medical Physics NBC 2005, PP. 241-242, Sweden, Umea, June 13-17, 2005

45

P. Hejazi Dinan, T. Rezaeian, M. Behzad, "Study on the Net Joint Moments of the Lower Limb in Normal and Above Knee Amputed Subjects", 13th Nordic Baltic Conference on Biomedical Engineering and Medical Physics NBC 2005, PP. 243-244, Sweden, Umea, June 13-17, 2005

46

A. S. Ghafari, M. Behzad, A. Meghdari, "Experimental Investigation on the Effects of Random Signals on Micro-Step Control Positioning Accuracty", the 9th Mechatronics Forum International Conference, MECHATRONICS 2004, PP. 477-485, Ankara, Turkey, Aug. 30-Sept. 1, 2004

47

M. Behzad, M. R. Hoseini, H. Salmasi, M. Asayesh, "Vibration Analysis of a Locomotive to Diagnose the Radiator Leakage", 17th International Congress on Condition Monitoring and Diagnostic Engineering Management, COMADEM 2004, PP. 584-591, Birmangam, UK, 23-25 Aug 2004

48

M. Behzad, A. R. Bastami, M. Maassoumian, "Fault Diagnosis of a Centrifugal Pump by Vibration Analysis", 7th Biennial Conference on Engineering Systems Design and Analysis, ESDA 2004, Manchester, United Kingdom, July 19-22, 2004

49

A. Amini, M. Behzad, V. Chegini, "Experimental Investigation on Horizontal Forces in Slopping Float Breakwaters", Int. Conf. On Hydraulic Structures, PP. 25-30, Iran 2001.

50

M. Behzad, M. Asayesh, "Misalignment Detection in Rotating Machinery by Vibration Analysis", International Power System Conference, 2000, PP 31-38

51

M. Behzad, "Comparison of the Riccati Transfer Matrix and the Transfer Matrix in Vibration Analysis" ASME 2000, 5th Conf. on Eng. Sys. Design and Analysis

52

M. Behzad, A. M. Amini, "Vibration Analysis of Ship Hull with Horizontal and Trosional Effects", ASME 2000, 5th Conf. on Eng. Sys. Design and Analysis

53

M. Behzad, M. Asayesh, "Finite Element Analysis of a Bent Rotor with Mass Unbalances for Machinery Diagnosis",PSC International Conference, 1999, p. 143-154

54

. Behzad, Nfeng, E J Hahn, "Vibration Analysis Of Rotor Bearing System Using The Riccati Transfer Matrix Approach", International Mechanical Engineering Congress Perth Western Australia, PP. 173-181, May 15-19 1994

55

M. Behzad, Nfeng, E J Hahn, "Vibration Analysis Of Rotor Bearing System Using The Riccati Transfer Matrix Approach", International Mechanical Engineering Congress Perth Western Australia, PP. 173-181, May 15-19 1994

56

M. Behzad, E J Hahn, "Predicated And Measured Natural Frequencies Of High Speed Rotating Shaft", Asia-Pacific Vibration Conference, PP. 8.13-8.18,1991

57

M. Behzad, M. S. Seif, M. Rowshan, "Evaluation of Passive Vibration Isolation in High Speed Planing Crafts for Human Comfort", The 16th Symposium on Theory and Practive of Shipbulding (In memoriam Prof. Leopold Sorta) SORTA 2004, Plitvice, Croatia, 21-23 Oct. 2004

58

M. Behzad, M.R. Hoseini, H. Salmasi, M. Asayesh, "Fault Diagnostic of two Reciprocating Machines by Vibration Analysis" Modern Technologies for Improving Quality and Upgrading the Level of Productivity Yield to Increase the Product’s Competitive Ability, Syria, 29-30 Sep. 2004

59

M. Behzad, H. Salmasi, A. R. Bastami, "Acoustic Analysis of Penstock of Hydro-power Plant", 17th International Congress on Condition Monitoring and Diagnostic Engineering Management, COMADEM 2004, PP. 576-583, Birmangam, UK, 23-25 Aug 2004

60

M. Behzad, R.T. Paein Koulaei, S.M. Mousaviraad, S.H. Saddathosseini, "Study of Parameters Pertaining to Seekeeping Performance of a Tousist Submarine", 15th International Conference on Hydrodynamics in Ship Design, Safety and Operation, Hydronav’ 2003, PP. 57-72, Poland, 2003

61

H. Eskandari, M. B. Shamsollahi, A. Rahimi, M. Behzad, P. Afkari, E. Azad Zamani, "Featue Extraction from Optimal Time-Frequency and Time-Scale Transforms for the Classification of the Knee Joint Vibroarthrographic Signals", IEEE Conference

62

M. Behzad, M. Asayesh, "Failure Investigation of a 150MW Turbiene Generator by Vibration Analysis", COMADEM 2003, Proceedings of the 16th International Congress, PP. 323-330

63

M. Behzad, "Investigation on Blade Failure in a Steam Turbine", MARID 2002, PP. 241-245, Bulgaria, 2002

64

M. Behzad, F. S. Hoseini, M. Asayesh,  "Thermal Unbalance Vibration of Rotating Machinery" MARID 2002, PP. 235-239, Bulgaria

65

M. Behzad, M.S. Seif, M. Asayesh, "Vibration Isolation in Boats for Huaman Safety and Comfort" MARID 2002, PP. 159-164, Bulgaria

66

M. Behzad, Shamsaii, Danesh, Taghipor, "Effects of Shear Terms on Static Stiffness and Dynamic Response of Tee Joints", ASME-ESDA 2002, PP. 1-7, Turkey

67

Bastami, Karagarnovin, Behzad, "Leteral Vibration Analysis of Shaft Influenced by Change of Disk Geometries" ASME-ESDA 2002, PP. 1-5, Turkey

68

M. Behzad, M. Asayesh, "Vibration Analysis of an Unbalance Bent Rotor", Aero 2000, PP 427-433

69

M. Behzad, M. Asayesh, "Finite Element Model of an Unbalanced Bent Rotor", ECCOMAS 2000, Spain

70

M. Behzad, "Effect of High Temperatanc on Vibration of Pipes", ECCM, 1999.

71

M. Behzad, E J Hahn, "The Effect Of Meshing teeth Stiffness Variation On The Of Geared Rotor System", The University Of  New South Wales, Sydney 2052 Australia

72

M. Behzad, and B. Mehri, "Accuracy of The Riccati Transfer Matrix Method in Rotor Dynamic Analysis", 1998, ASME-GT-513

73

Book Chapter

 

Amirhossein Mollaali, Mehdi Behzad, and Motahareh Mirfarah  “Advances in Asset Management and Condition Monitoring COMADEM page 855-869

1

M. Hosseini Yazdi, M. Behzad, and S. Khodaygan Advances in Condition Monitoring and Structural Health Monitoring WCCM 2019” page 333-342

2

 

UP