RECENT PUBLICATIONS AND PRESENTATIONS (English)

Journal Papers (English):

1. E. Memarzadeh Lotfabad, H. R. Madaah Hosseini, H. Asghari Shivaee, S. Roostaie, Structural and Magnetic Study of Active Screen Plasma Nitrided Fe73:5Si13:5B9Nb3Cu1 and  Fe77Si11B9Nb2:4Cu0:6 Ribbons, Sicentia Iranica, Transaction F: Nanotechnology, Vol. 17, No. 1, pp. 12-22.

2. S. Moeinifar, A.H. Kokabi, H.R. Madaah-Hosseini,, Effect of tandem submerged arc welding process and parameters of Gleeble simulator thermal cycles on properties of the intercritically  reheated heat affected, Materials & Design, Volume 32, Issue 2, February 2011, Pages 869-876.

3. S. Moeinifar, A.H. Kokabi, H.R. Madaah-Hosseini,, Role of tandem submerged arc welding thermal cycles on properties of the heat affected zone in X80 microalloyed pipe line steel, Journal of   Materials Processing Technology, In Press, Corrected Proof, Available online 23 October 2010.

4. A. R. Etemadi, P. Behjati, H. R. Madaah Hosseini, A. H. Kokabi, Failure analysis of brazed air passages of an aircraft fuel system, Engineering Failure Analysis, Volume 17, Issue 6, September  2010, Pages 1495-1499.

5 . Moeinifar, A.H. Kokabi, H.R. Madaah-Hosseini,, Influence of peak temperature during simulation and real thermal cycles on microstructure and fracture properties of the reheated zones,  Materials & Design, Volume 31, Issue 6, June 2010, Pages 2948-2955.

6. H. Asghari Shivaee, H. R. Madaah Hosseini, E. Memarzadeh Lotfabad, S. Roostaie, Study of nanocrystallization in FINEMET alloy by active screen plasma nitriding, Journal of Alloys and  Compounds, Volume 491, Issues 1-2, 18 February 2010, Pages 487-494.

7. H. Asghari Shivaee, H. R. Madaah Hosseini, Advanced isoconversional kinetics of nanocrystallization in Fe73.5Si13.5B9Nb3Cu1 alloy, Thermochimica Acta, Volume 494, Issues 1-2, 10  October 2009, Pages 80-85.

8. H. Asghari Shivaee, A. Nozad Golikand, H. R. Madaah Hosseini, Mehdi Asgari, Influence of annealing on the electrochemical behavior of finemet amorphous and nanocrystalline alloy, Journal  of Materials Science, Volume 45, Number 2 / January, 2010, Pages 546-551.

9. M. Movahedi, A.H. Kokabi, H.R. Madaah-Hosseini, An investigation on the soldering of Al 3003/Zn sheets, Materials Characterization, Volume 60, Issue 5, May 2009, Pages 441-446.

10. M. Nofar, H.R. Madaah Hosseini, N. Kolagar-Daroonkolaie, Fabrication of high wear resistant Al/Al3Ti metal matrix composite by in situ hot press method, Materials & Design, Volume 30, Issue 2, February 2009, Pages 280-286.

11. M. Nofar, H.R. Madaah Hosseini, H.A. Shivaee, The dependency of optical properties on density for hot pressed MgF2, Infrared Physics & Technology, Volume 51, Issue 6, , October 2008, Pages 546-549.

12. S. Hosseini Vajargah, H. R. Madaah Hosseini, Z. A. Nemati, Preparation and Characterization of Nanocrystalline Misch-metal Substituted Yttrium Iron Garnet Powder by Sol-Gel Combustion  Process, International Journal of Applied Ceramic Technology, Volume 5, No. 5, 2008, Pages 464-468.

13. M. Movahedi, H.R. Madaah-Hosseini, A.H. Kokabi, The influence of roll bonding parameters on the bond strength of Al-3003/Zn soldering sheets, Materials Science and Engineering: A,  Volume 487, Issues 1-2, , 25 July 2008, Pages 417-423.

14. S. Miraghaei, P. Abachi, H.R. Madaah-Hosseini, A. Bahrami, Characterization of mechanically alloyed Fe100-xSix and Fe83.5Si13.5Nb3 nanocrystalline powders, Journal of Materials  Processing Technology, Volume 203, Issues 1-3, , 18 July 2008, Pages 554-560.

15. V. Abbasi Chianeh, H.R. Madaah Hosseini, M. Nofar, Micro structural features and mechanical properties of Al-Al3Ti composite fabricated by in-situ powder metallurgy route, Journal of  Alloys and Compounds, In Press, Corrected Proof, , Available online 7 July 2008.

16. S.R. Hejazi, H.R. Madaah Hosseini, M. Sasani Ghamsari, The role of reactants and droplet interfaces on nucleation and growth of ZnO nanorods synthesized by vapor-liquid-solid (VLS)  mechanism, Journal of Alloys and Compounds, Volume 455, Issues 1-2, , 8 May 2008, Pages 353-357.

17. H.R. Madaah Hosseini, N. Naghibolashraphy, The effects of Misch-Metal oxide addition on magnetic properties and crystal structure of Sr1-xMMxFe12O19 ferrite, Journal of Alloys and  Compounds, Volume 448, Issues 1-2, , 10 January 2008, Pages 284-286.

18. S.R. Hejazi, H.R. Madaah Hosseini, A diffusion-controlled kinetic model for growth of Au-catalyzed ZnO nanorods: Theory and experiment, Journal of Crystal Growth, Volume 309, Issue 1, , 1  November 2007, Pages 70-75.

19. S. Hosseini Vajargah, H.R. Madaah Hosseini, Z.A. Nemati, Preparation and characterization of yttrium iron garnet (YIG) nanocrystalline powders by auto-combustion of nitrate-citrate gel,  Journal of Alloys and Compounds, Volume 430, Issues 1-2, 14 March 2007, Pages 339-343.

20. S.H. Mousavi Anijdan, H.R. Madaah-Hosseini, A. Bahrami, Flow stress optimization for 304 stainless steel under cold and warm compression by artificial neural network and genetic  algorithm, Materials & Design, Volume 28, Issue 2, , 2007, Pages 609-615.

21. I. Hemmati, H.R. Madaah Hosseini, S. Miraghaei, Effect of processing parameters on electrical, mechanical and magnetic properties of an iron-resin soft magnetic composite, Powder  Metallurgy, Volume 50, 2007, Pages 86-90.

22. I. Hemmati, H.R. Madaah Hosseini, A. Kianvash, The correlations between processing parameters and magnetic properties of an iron-resin soft magnetic composite, Journal of Magnetism  and  Magnetic Materials, Volume 305, Issue 1, , October 2006, Pages 147-151.

23. H.R. Madaah Hosseini, A. Dadoo, A. Dolati, A. Kianvash, A study on the corrosion behavior of the (Nd, MM)2(Fe, Co, Ni)14B-type sintered magnets, Journal of Alloys and Compounds,  Volume 419, Issues 1-2, , 10 August 2006, Pages 337-341.

24. S. Hosseini Vajargah, H.R. Madaah Hosseini, Z.A. Nemati, Synthesis of nanocrystalline yttrium iron garnets by sol-gel combustion process: The influence of pH of precursor solution,  Materials  Science and Engineering: B, Volume 129, Issues 1-3, 15 April 2006, Pages 211-215.

25. A. Bahrami, H.R. Madaah Hosseini, P. Abachi, S. Miraghaei, Structural and soft magnetic properties of nanocrystalline Fe85Si10Ni5 powders prepared by mechanical alloying, Materials  Letters, Volume 60, Issue 8, , April 2006, Pages 1068-1070.

26. H.R. Madaah Hosseini, A. Kianvash, The effects of MM38.2Co46.4Ni15.4 alloy additions on the mechanical properties of a Nd12.8Fe79.8B7.4-type sintered magnet, Materials Letters, Volume  60, Issue 4, , February 2006, Pages 555-558.

27. S.H. Mousavi Anijdan, A. Bahrami, H.R. Madaah Hosseini, A. Shafyei, Using genetic algorithm and artificial neural network analyses to design an Al-Si casting alloy of minimum porosity,  Materials & Design, Volume 27, Issue 7, , 2006, Pages 605-609. 

28. A. Bahrami, S.H. Mousavi Anijdan, H.R. Madaah Hosseini, A. Shafyei, R. Narimani, Effective parameters modeling in compression of an austenitic stainless steel using artificial neural  network,  Computational Materials Science, Volume 34, Issue 4, , December 2005, Pages 335-341.

29. H.R.  Madaah Hosseini, A. Bahrami, Preparation of nanocrystalline Fe-Si-Ni soft magnetic powders by mechanical alloying, Materials Science and Engineering: B, Volume 123, Issue 1, 15  November 2005, Pages 74-79.

30. H. R. Madaah Hosseini, A. Kianvash, The role of milling atmosphere on microstructure and magnetic properties of a Nd12.8Fe79.8B7.4-type sintered magnet, Journal of Magnetism and  Magnetic Materials, Volume 281, Issue 1, , October 2004, Pages 92-96.

31. H. R. Madaah-Hosseini, A. H. Kokabi, Cold roll bonding of 5754-aluminum strips, Materials Science and Engineering A, Volume 335, Issues 1-2, , 25 September 2002, Pages 186-190.

32. H. R. Madaah-Hosseini, A. Kianvash, H. Yoozbashi-Zadeh, M. Seyyed-Reihani, A correlation between intrinsic coercivity-electrical conductivity-thermal treatment in a  Nd11.9MM2.9Fe73.9Co3.3Ni1.1B6.9-type magnet, Journal of Alloys and Compounds, Volume 314, Issues 1-2, 16 January 2001, Pages 251-256.

33. H. R. Madaah Hosseini, A. Kianvash, M. Seyyed Reihani, H. Yoozbashi Zadeh, Production of (Nd,MM)2(Fe,Co,Ni)14B-type sintered magnets using a binary powder blending technique,  Journal  of Alloys and Compounds, Volume 298, Issues 1-2, , 28 February 2000, Pages 319-323.


Conference Proceedings (English):

1. S. Moeinifar.A. H. Kokabi, H. R. Madaah Hosseini, C. Shang, G. Hui, L. Zhen, Influence Of Four Wires Tandem Submerged Arc Welding Process On Heat Affected Zone  Properties In High Strength Pipeline Steel, 2010 IACSIT SANYA CONFERENCES, Jan 22 - 24, 2010, Sanya, China.

2. H. Delavar, R. Shidpour, H. R. Madaah Hosseini, A. Simchi, The influence of edge and corner of nanoparticles on Curie temperature, 3rd Conference on Nanostructures  (NS2010), March 10-12 2010, Kish Island, Iran.

3. E. Memarzadeh Lotfabad, H. R. Madaah Hosseini, H. A. Shivaee, New Heat Treatment Method for Improving the Surface of Nanocrystalline alloys, 3Th Conference on  Nanostructures (NS 2010), March 10-12 2010, Kish Island, Iran.

4. E. Memarzadeh Lotfabad, H. R. Madaah Hosseini, The Effect of Active Screen Plasma Nitriding treatment on structural, Mechanical and Magnetic Properties of   Nanocrystalline Finmet-Type Alloy, 2nd International Conference on Ultrafine Grained and Nanostructured Materials (UFGNSM09), November 14-15, 2009, University of  Tehran, Iran.

5. R. Ahmadi, H. R. Madaah Hosseini, A. Sohrabi, Characterization of Magnetite Nanoparticles Coating Density, The China-Germany Bilateral Symposium on  Bioelectronics  and Biomaterials (CGBSBB 2009).

6. R. Ahmadi, H. R. Madaah Hosseini, Investigation of Avrami behavior of magnetite nanoparticles formation in co-precipitation process, The China-Germany Bilateral  Symposium on Bioelectronics and Biomaterials (CGBSBB 2009).

7. S. Moeinifar.A. H. Kokabi, H. R. Madaah Hosseini, IIW International Congress on Welding & Joining, November 30- December 1 2009, Tehran, Iran.

8. M. Hajfathalian, Z. R. Nemat, H. R. Madaah Hosseini, Evaluvation of nanocrystalline BA(ZRXTI1-X)O3 produced by mechanical alloying, 2nd International Conference on Ultrafine Grained and Nanostructured Materials (UFGNSM09), November 14-15, 2009, University of Tehran, Iran.

9. E. Memarzadeh Lotfabad, H. R. Madaah Hosseini, H. A. Shivaee, S. Roostaie, Plasma Nitriding Treatment of Nanocrystalline FINEMET Alloy, 2ed Iran-India Joint  Conference on Nanotechnology (IIJCN-2009), 5-7 May 2009, University of Isfahan, Iran.

10. M. M. Atabaki, H. R. Madaah Hosseini, A. H. Kokabi, Influence of the furnace brazing process parameters on the chemical heterogeneity, mechanical and physical  properties of copper- beryllium alloy joints, 4Th International Brazing and Soldering Conference (IBSC), April 26-29, 2009, Orlando, Florida.

11. T. Gheiratmand, H. R. Madaah Hosseini, Preparation of Nanocrystalline Fe-Ni-Co-Ti Powders by Mechanical Alloying, 2nd International Congress on Nanoscience and  Nanotechnology - ICNN 2008, University of Tabriz, October 2008, Tabriz, Iran.

12. M. Haj-Fathalian, H. R. Madaah Hosseini, Z. R. Nemat, Ba(Ti1-xZrx)O3 Composites from Mechanically Alloyed Nanopowders, 2nd International Congress on  Nanoscience and Nanotechnology - ICNN 2008, University of Tabriz, October 2008, Tabriz, Iran.

13. A. Zareh, H. R. Madaah Hosseini, Z. R. Nemat, Synthesis of Nanocrystalline Yttrium Aluminum Garnets by Sol–Gel Combustion Process: The Influence of pH of Precursor  Solution, 2nd International Congress on Nanoscience and Nanotechnology - ICNN 2008, University of Tabriz, October 2008, Tabriz, Iran.

14. S. Amin-Yavari, A. A. Ziaei-Moayed, H. R. Madaah-Hoseini, Influence of Shot Peening Treatment on the Fatigue Life of Ti6Al4V ELI Biomedical Alloy, 10Th international  conference of shot peening (ICSP-10), September 15-18, 2008, Tokyo, Japan.

15. H.A. Shivaee, H.R. Madaah Hosseini, A. Irajizad, Thermal and Crystallization Behavior of Finmet Amorphous Melt-Spun Ribbons, Proceedings of the 2nd Conference on  Nanostructhres (NS2008), March 2008, Kish University, Iran, Pages 200-201.

16. S.R. Hejazi, H.R. Madaah Hosseini, M. Sasani Ghamsari, M. Shirvani,, Effects of Annealing on Growth and Morphological Aspects of Nanometric Au Islands Sputtered on  SiO2 Substrate, First International Congress on Nanoscience and Nanotechnology, December 2006, University of Tehran, Iran.

17. S. Miraghaei, P. Abachi, H.R. Madaah-Hosseini, Effects of Milling Time, Si Content and Heat Treatment on Microstructure and Magnetic Properties of Mechanically  Alloyed Fe-Si Powders, COM 2006- including the 36th Annual Hydrometallurgy Meeting and ICSOBA 2006, October 1-4, 2006, Montréal, Québec, Canada, Pages 187-202.

18. M. Nofar, H.R. Madaah Hosseini, H.A. Shivaee, The Effect of Hot Pressing Parameters on the Microstructure and Infrared Transparency of MgF2 Ceramics, Tehran  International Congress on Manufacturing Engineering (TICME2005), Tehran, Iran, December 2005.

19. I. Hemmati, H.R. Madaah Hosseini,, M. Nasserian, F. Irani, Production of Soft Magnetic Iron-Resin Composites and Their Applications in Automotive Industry, Proc. 4th  Int. Conference on PM for Automotive Parts, ed. A. Arvand and H. Danninger, Isfahan, Iran, April 2005, Pages 276-286.

20. H. R. Madaah Hosseini, A. Kianvash, The effects of oxygen content on sintering behavior and magnetic properties of a Nd12.8Fe79.8B7.4– type sintered magnet, Proc.  Euro PM 2003, Spain, Volume 2, Oct. 2003, 233-238.

21. H. R. Madaah Hosseini, A. Kianvash, Microstructural and Mechanical Effects of a MM38.2Co46.4Ni15.4 Alloy Additions to a Nd-Fe-B Sintered Magnet, Proc. Euro PM  2003, Spain, Volume 2, Oct. 2003, 229-232.

22. H. R. Madaah Hosseini, Application of P/M Permanent Magnets in Automotive Industry, Proc. 3 rd Int. Conference on PM for Automotive Parts, ed. A. Arvand and H.  Danninger, Isfahan, Iran, April 2002 Paper No. 24.

23. H. R. Madaah Hosseini M. Seyyed Reihani, H. Yoozbashi Zadeh, , A. Kianvash,, The influence of heat treatment on the magnetic properties of  Nd11.9MM2.8Fe73.9Co3.3Ni1.1B6.9 sintered magnets, Proc. First Regional Conference on Magnetic and Superconducting Materials (MSM-99), ed. M.Akhavan, J. Jensen  and K. Kitazawa, World Scientific Pub., Iran, , Volume B, Sep. 1999, pages1007-1014.

24. Madaah Hosseini, H.R., Seyed Reihani, M. and Yoozbashizadeh, H., "The Microstructure - Properties Relationships of (Nd,MM)2(Fe,Co,Ni)14B Sintered Magnets",  Proc.  first Int. Conference on PM for Automotive Parts, ed. A. Arvand and H. Danninger, Isfahan, Iran, April 1999, paper No. 22.

25. H. R. Madaah-Hosseini, A. Kianvash, H. Yoozbashi-Zadeh, M. Seyyed-Reihani, Binary Powder Blending Technique (BPBT): An Effective Method in Production of  (Nd,MM)2(Fe,Co,Ni)14B-Type Corrosion Resistant Magnets, Proc. 16th Int. Workshop on RE Mag. and their Applications, Japan, Volume 1, Sept.2000, pages 229-235.

Books (Persian):

1. Brazing and Soldering, Jahan Jam-E- Jam Pub., 2004, Tehran, Iran.
2. Fundamentals of Nanotechnology, Kavosh Ghalam Pub., 2008, Tehran Iran.