2024

Modeling the effect of Mg addition on microstructured strength of aluminum during severe plastic deformation‏

H Parvin, M Kazeminezhad‏

Journal of Materials Research and Technology 28, 3013-3024‏

2024

Strength evolution during accumulative roll bonding of the metal matrix composite‏

H Parvin, M Kazeminezhad‏

Journal of Materials Research and Technology 24, 1513-1523‏

2023

Mechanistic modelling of cryo-deformation and post-annealing of aluminium‏

A Alyani, M Kazeminezhad‏

Materials Science and Technology 39 (4), 485-495‏

2023

Pre and post rolling homogenization of direct chill cast Al-6Mg alloy: effect on microstructure and mechanical properties‏

MA Mostafaei, M Kazeminezhad‏

Advances in Materials and Processing Technologies, 1-15‏

2023

Friction stir welding of severely plastic deformed aluminum using (Al2O3+ graphite) hybrid powders: Grain structure stability and mechanical performance‏

SE Moosavi, M Movahedi, M Kazeminezhad‏

Journal of Materials Research and Technology 21, 961-980‏

2022

On the solution treatment of severely deformed AA2024-O and subsequent natural aging‏

M Forouzesh, M Kazeminezhad‏

Journal of Materials Research and Technology 20, 1558-1569‏

2022

Bimodal grain size and mechanical properties enhancement in low carbon steel by ultra-rapid annealing‏

MA Mostafaei, M Kazeminezhad‏

Journal of Materials Research and Technology 18, 2363-2367‏

2022

Annealing behavior of aluminum after low-temperature severe plastic deformation

Alyani, A., Kazeminezhad, M.

Materials Science and Engineering A, 2021, 824, 141810

2021

MANUFACTURING THINNED FRICTION-STIR WELDED 1050 ALUMINUM BY POST ROLLING: MICROSTRUCTURE AND MECHANICAL PROPERTIES

Ajabshir, S.Z., Kazeminezhad, M., Kokabi, A.H.

Materiali in Tehnologije, 2021, 55(5), pp. 609–617

2021

Effect of two steps annealing on the microstructure and dynamic strain aging behavior of Al-6Mg alloy

Saadat, Z., Khani Moghanaki, S., Kazeminezhad, M., Goodarzi, M., Ghiasi Afjeh, S.M.B.

Materials Science and Engineering A, 2020, 798, 140097

2020

Flow stress of 2024 aluminum alloy during multi-directional forging process and natural aging after plastic deformation

Nouri, S., Kazeminezhad, M., Shadkam, A.

Materials Chemistry and Physics, 2020, 254, 123446

2020

Effect of severe plastic deformation on evolution of intermetallic layer and mechanical properties of cold roll bonded Al-Steel bilayer sheets

Dehghanpour Baruj, H., Shadkam, A., Kazeminezhad, M.

Journal of Materials Research and Technology, 2020, 9(5), pp. 11497–11508

2020

Sound velocity in severely deformed aluminum alloys: AA1100 and AA2024

F Yaghoubi, S Khani Moghanaki, M Kazeminezhad

Applied Physics A: Materials Science and Processing, 2020, 126(4), 302

2020

Limiting grain size through high pressure torsion of different materials

H Parvin, M Kazeminezhad

Materials Science and Technology (United Kingdom), 2020, 36(2), pp. 245–250

2020

The effect of strain rate on multi-directional forged aluminum: Examining the experimental data and modeling results

2020

Effects of non-isothermal annealing on microstructure and mechanical properties of severely deformed aluminum samples: Modeling and experiment

2019

Flow Stress Evolution in Further Straining of Severely Deformed Al

2019

Effect of electropulsing on microstructure and hardness of cold-rolled low carbon steel

2019

Cell-structure and flow stress investigation of largely strained non-heat-treatable Al-alloys using dislocation based model

2019

Non-isothermal aging of a high-Zn-containing Al–Zn–Mg–Cu alloy: microstructure and mechanical properties

2018

Post Deformation at Room and Cryogenic Temperature Cooling Media on Severely Deformed 1050-Aluminum

2018

Synergistic Strengthening by Severe Plastic Deformation and Post‐Heat Treatment of a Low‐Carbon Steel

2018

Mechanical behavior and texture development of over-aged and solution treated Al-Cu-Mg alloy during multi-directional forging

2018

Recrystallization behavior of multi-directionally forged over-aged and solution treated Al-Cu-Mg alloy during non-isothermal annealing

SK Moghanaki, M Kazeminezhad, R Logé

Materials & Design 132, 250-256, 2017

2017

Rapid annealing of severely deformed low carbon steel in subcritical temperature range

H Ghiabakloo, M Kazeminezhad

Metals and Materials International 23 (5), 984-993, 2017

2017

Effect of concurrent precipitation on the texture evolution during continuous heating of multi directionally forged solution treated Al-Cu-Mg alloy

SK Moghanaki, M Kazeminezhad, R Logé

Materials Characterization 131, 399-405, 2017

2017

Heating rate effect on particle stimulated nucleation and grains structure during non-isothermal annealing of multi-directionally forged solution treated AA2024

SK Moghanaki, M Kazeminezhad, R Logé

Materials Characterization 127, 317-324, 2017

2017

Influence of ambient and cryogenic temperature on friction stir processing of severely deformed aluminum with SiC nanoparticles

MS Khorrami, M Kazeminezhad, Y Miyashita, N Saito, AH Kokabi

Journal of Alloys and Compounds, 2017

2017

Improvement in the mechanical properties of Al/SiC nanocomposites fabricated by severe plastic deformation and friction stir processing

MS Khorrami, M Kazeminezhad, Y Miyashita, AH Kokabi

International Journal of Minerals, Metallurgy, and Materials 24 (3), 297-308, 2017

2017

Effects of non-isothermal annealing on microstructure and mechanical properties of severely deformed 2024 aluminum alloy

SK MOGHANAKI, M KAZEMINEZHAD

Transactions of Nonferrous Metals Society of China 27 (1), 1-9, 2017

2017

Electrical annealing of severely deformed copper: microstructure and hardness

S Nobakht, M Kazeminezhad

International Journal of Minerals, Metallurgy and Material 10, 009, 2017

2017

Deformation Behavior of Severely Deformed Al and Related Mechanisms Through Warm Tensile Test

V Charkhesht, M Kazeminezhad

Journal of Materials Engineering and Performance, 1-14, 2017

2017

The Correlation of Stir Zone Texture Development with Base Metal Texture and Tool-Induced Deformation in Friction Stir Processing of Severely Deformed Aluminum

MS Khorrami, M Kazeminezhad, Y Miyashita, AH Kokabi

Metallurgical and Materials Transactions A 48 (1), 188-197, 2017

2017

Friction stir butt welding of Al-Cu bilayer laminated composites: analysis of force, torque, and temperature

A Beygi, R., Kazeminezhad, M., Mehrizi, M.Z., Eisaabadi B, G., Loureiro

The International Journal of Advanced Manufacturing Technology, 393-400, 2017

2017

Modeling of the mutual effect of dynamic precipitation and dislocation density in age hardenable aluminum alloys

SK Moghanaki, M Kazeminezhad

Journal of Alloys and Compounds 683, 527-532, 2016

2016

Microstructural evolution during ultra-rapid annealing of severely deformed low-carbon steel: strain, temperature, and heating rate effects

MA Mostafaei, M Kazeminezhad

International Journal of Minerals, Metallurgy, and Materials 23 (7), 779-792, 2016

2016

Energy absorption of friction stir welded 1050 aluminum sheets through wedge tearing

M Amiri, M Kazeminezhad, AH Kokabi

Materials & Design 93, 216-223, 2016

2016

Effect of Starting Microstructure through Severe Plastic Deformation and Ultra‐Rapid Annealing of Low‐Carbon Steel

MA Mostafaei, M Kazeminezhad

steel research international, 2016

2016

Surrogate-based Pareto optimization of annealing parameters for severely deformed steel

H Ghiabakloo, K Lee, M Kazeminezhad, BS Kang

Materials & Design 92, 1062-1069, 2016

2016

Microstructure and mechanical properties improvement by ultra-rapid annealing of severely deformed low-carbon steel

MA Mostafaei, M Kazeminezhad

Materials Science and Engineering: A 655, 229-236, 2016

2016

Modelling the temperature rise effect through high-pressure torsion

H Parvin, M Kazeminezhad

Materials Science and Technology, 1-5, 2016

2016

Multi Directional Forging of 2024 Al Alloy After Different Heat Treatments: Microstructural and Mechanical Behavior

S Asadi, M Kazeminezhad

Transactions of the Indian Institute of Metals, 1-13, 2016

2016

Dependency modeling of steady state grain size on the stacking fault energy through severe plastic deformation

H Parvin, M Kazeminezhad

Materials Letters 159, 410-412, 2015

2015

Two-internal variable thermodynamics modelling of severe plastic deformation: dislocation and flow stress evolutions

H Parvin, M Kazeminezhad

Materials Science and Technology 31 (14), 1788-1793, 2015

2015

Thermal stability of aluminum after friction stir processing with SiC nanoparticles

MS Khorrami, M Kazeminezhad, AH Kokabi

Materials & Design 80, 41-50, 2015

2015

Effects of heat input in friction stir welding on microstructure and mechanical properties of AA3003-H18 plates

B Abnar, M Kazeminezhad, AH Kokabi

Transactions of Nonferrous Metals Society of China 25 (7), 2147-2155, 2015

2015

Microstructure and mechanical properties of an Al–Mg–Si tube processed by severe plastic deformation and subsequent annealing

MH Farshidi, M Kazeminezhad, H Miyamoto

Materials Science and Engineering: A 640, 42-50, 2015

2015

Metallurgical characteristics and failure mode transition for dissimilar resistance spot welds between ultra-fine grained and coarse-grained low carbon steel sheets

F Khodabakhshi, M Kazeminezhad, AH Kokabi

Materials Science and Engineering: A 637, 12-22, 2015

2015

Friction Stir Welding of Al-Cu Bilayer Sheet by Tapered Threaded Pin: Microstructure, Material Flow, and Fracture Behavior

R Beygi, M Kazeminezhad, AH Kokabi, A Loureiro

Metallurgical and Materials Transactions A 46 (6), 2544-2553, 2015

2015

Influence of stored strain on fabricating of Al/SiC nanocomposite by friction stir processing

MS Khorrami, M Kazeminezhad, AH Kokabi

Metallurgical and Materials Transactions A 46 (5), 2021-2034, 2015

2015

The Effect of Premixed Al-Cu Powder on the Stir Zone in Friction Stir Welding of AA3003-H18

B Abnar, M Kazeminezhad, AH Kokabi

Journal of Materials Engineering and Performance 24 (2), 1086-1093, 2015

2015

The effects of die geometry in tube channel pressing: Severe plastic deformation

MH Farshidi, M Kazeminezhad

Proceedings of the Institution of Mechanical Engineers, Part L: Journal of …, 2015

2015

Development a dislocation density based model considering the effect of stacking fault energy: Severe plastic deformation

H Parvin, M Kazeminezhad

Computational Materials Science 95, 250-255, 2014

2014

Microstructrual evolution of aluminum 6061 alloy through tube channel pressing

MH Farshidi, M Kazeminezhad, H Miyamoto

Materials Science and Engineering: A 615, 139-147, 2014

2014

Static Strain Aging Behavior of Low Carbon Steel Drawn Wire

M Kazeminezhad, Y Khaledzadeh, A Karimi Taheri

Iranian Journal of Materials Forming 1, 44-51, 2014

2014

Effects of cold severe plastic deformation and heating on dendritic and non-dendritic structures: A356 alloy

A Dodangeh, M Kazeminezhad, H Aashuri

International Journal of Cast Metals Research 27 (5), 312-320, 2014

2014

Microstructure and mechanical properties in dissimilar butt friction stir welding of severely plastic deformed aluminum AA 1050 and commercially pure copper sheets

H Barekatain, M Kazeminezhad, AH Kokabi

Journal of Materials Science & Technology 30 (8), 826-834, 2014

2014

The Effect of Cu Powder During Friction Stir Welding on Microstructure and Mechanical Properties of AA3003-H18

B Abnar, M Kazeminezhad, AH Kokabi

Metallurgical and Materials Transactions A 45 (9), 3882-3891, 2014

2014

Differential scanning calorimetry study of constrained groove pressed low carbon steel: recovery, recrystallisation and ferrite to austenite phase transformation

F Khodabakhshi, M Kazeminezhad

Materials Science and Technology 30 (7), 765-773, 2014

2014

The effect of SiC nanoparticles on the friction stir processing of severely deformed aluminum

MS Khorrami, M Kazeminezhad, AH Kokabi

Materials Science and Engineering: A 602, 110-118, 2014

2014

Influence of Tool Geometry and Contact Condition on Friction Stir Welding of Al-Cu Laminated Composites

R Beygi, M Kazeminezhad, AH Kokabi, S Alvani, D Verdera, A Loureiro

Advanced Materials Research 856, 16-21, 2014

2014

On the failure behavior of highly cold worked low carbon steel resistance spot welds

F Khodabakhshi, M Kazeminezhad, AH Kokabi

Metallurgical and Materials Transactions A 45 (3), 1376-1389, 2014

2014

Modeling of dislocation density and strength on rheoforged A356 alloy during multi-directional forging

J Kavosi, M Saei, M Kazeminezhad, A Dodangeh

Computational Materials Science 81, 284-289, 2014

2014

Microstructural Evolution and Fracture Behavior of Friction-Stir-Welded Al-Cu Laminated Composites

R Beygi, M Kazeminezhad, AH Kokabi

Metallurgical and Materials Transactions A 45 (1), 361-370, 2014

2014

The effect of direct and cross-rolling on mechanical properties and microstructure of severely deformed aluminum

KR Mamaghani, M Kazeminezhad

Journal of materials engineering and performance 23 (1), 115-124, 2014

2014

Prediction of the mechanical properties of rods after cold forging and heat treatment

M Kazeminezhad

The International Journal of Advanced Manufacturing Technology 69 (9-12 …, 2013

2013

On the natural aging behavior of Aluminum 6061 alloy after severe plastic deformation

MH Farshidi, M Kazeminezhad, H Miyamoto

Materials Science and Engineering: A 580, 202-208, 2013

2013

Thermal stability during annealing of friction stir welded aluminum sheet produced by constrained groove pressing

MS Khorrami, M Kazeminezhad, AH Kokabi

Materials & Design 45, 222-227, 2013

2013

Analyses on the flow stress of an Al-Mg alloy during dynamic recovery

MA Mostafaei, M Kazeminezhad

Journal of materials engineering and performance 22 (3), 700-705, 2013

2013

Dislocation density and flow stress modeling of nanostructured Al–SiC p composite during accumulative roll bonding

J Kavosi, M Saei, M Kazeminezhad

Computational Materials Science 67, 359-363, 2013

2013

Severe plastic deformation of 6061 aluminum alloy tube with pre and post heat treatments

MH Farshidi, M Kazeminezhad, H Miyamoto

Materials Science and Engineering: A 563, 60-67, 2013

2013

Butt joining of Al–Cu bilayer sheet through friction stir welding

R Beygi, M Kazeminezhad, AH Kokabi

Transactions of Nonferrous Metals Society of China 22 (12), 2925-2929, 2012

2012

Severe plastic deformation of rheoforged aluminum alloy A356

A Dodangeh, M Kazeminezhad, H Aashuri

Materials Science and Engineering: A 558, 371-376, 2012

2012

Deformation Behavior of 6061 Aluminum Alloy Through Tube Channel Pressing: Severe Plastic Deformation

MH Farshidi, M Kazeminezhad

Journal of materials engineering and performance 21 (10), 2099-2105, 2012

2012

Microstructure evolutions after friction stir welding of severely deformed aluminum sheets

MS Khorrami, M Kazeminezhad, AH Kokabi

Materials & Design 40, 364-372, 2012

2012

Resistance spot welding of ultra-fine grained steel sheets produced by constrained groove pressing: Optimization and characterization

F Khodabakhshi, M Kazeminezhad, AH Kokabi

Materials Characterization 69, 71-83, 2012

2012

Computation on new deformation routes of tube channel pressing considering back pressure and friction effects

A Zangiabadi, M Kazeminezhad

Computational Materials Science 59, 174-181, 2012

2012

Modeling of austenite to ferrite transformation

M Kazeminezhad

Bulletin of Materials Science 35 (3), 395-398, 2012

2012

A novel approach to find the kinetics of dynamic recovery based on hot flow curves

MA Mostafaei, M Kazeminezhad

Materials Science and Engineering: A 544, 88-91, 2012

2012

Mechanical properties of severely plastic deformed aluminum sheets joined by friction stir welding

MS Khorrami, M Kazeminezhad, AH Kokabi

Materials Science and Engineering: A 543, 243-248, 2012

2012

A modified model on solute alloying element effect in Al–Mg alloys: Mechanical properties and dislocation density evolutions

SS Firouzabadi, M Kazeminezhad

Materials & Design 36, 804-808, 2012

2012

Hot deformation behavior of hot extruded Al–6Mg alloy

MA Mostafaei, M Kazeminezhad

Materials Science and Engineering: A 535, 216-221, 2012

2012

Work hardening and mechanical properties of severely deformed AA3003 by constrained groove pressing

F Khakbaz, M Kazeminezhad

Journal of Manufacturing Processes 14 (1), 20-25, 2012

2012

Strain rate sensitivity and fracture behavior of severely deformed Al–Mn alloy sheets

F Khakbaz, M Kazeminezhad

Materials Science and Engineering: A 532, 26-30, 2012

2012

Microstructure evolutions after friction stir welding of severely deformed aluminum sheets

M Sarkari Khorrami, M Kazeminezhad, AH Kokabi

Materials and Design 40, 364, 2012

2012

Mechanical properties and microstructure of resistance spot welded severely deformed low carbon steel

F Khodabakhshi, M Kazeminezhad, AH Kokabi

Materials Science and Engineering: A 529, 237-245, 2011

2011

Tearing energy of an annealed bilayer sheet through multiple and single tensile tests

R Beygi, M Kazeminezhad

Materials Science and Engineering: A 528 (29), 8800-8803, 2011

2011

Microstructure generation of severely deformed materials using voronoi diagram in laguerre geometry: Full algorithm

R Jafari, M Kazeminezhad

Computational Materials Science 50 (9), 2698-2705, 2011

2011

The effect of constrained groove pressing on grain size, dislocation density and electrical resistivity of low carbon steel

F Khodabakhshi, M Kazeminezhad

Materials & Design 32 (6), 3280-3286, 2011

2011

The annealing phenomena and thermal stability of severely deformed steel sheet

F Khodabakhshi, M Kazeminezhad

Materials Science and Engineering: A 528 (15), 5212-5218, 2011

2011

Development of a novel severe plastic deformation method for tubular materials: Tube Channel Pressing (TCP)

A Zangiabadi, M Kazeminezhad

Materials Science and Engineering: A 528 (15), 5066-5072, 2011

2011

Implementation of a constitutive model in finite element method for intense deformation

E Hosseini, M Kazeminezhad

Materials & Design 32 (2), 487-494, 2011

2011

A new microstructural model based on dislocation generation and consumption mechanisms through severe plastic deformation

E Hosseini, M Kazeminezhad

Computational Materials Science 50 (3), 1123-1135, 2011

2011

Effect of Post Annealing Treatment on Nano-Structured Low Carbon Steel Sheets Processed by Constrained Groove Pressing

F Khodabakhshi, M Kazeminezhad, M Azarnush, SH Miran

Materials Science Forum 667, 1009-1014, 2011

2011

Energy absorption mechanism of Al–steel bilayer sheets produced by cold roll welding during wedge tearing

R Beygi, M Kazeminezhad

International Journal of Mechanical Sciences 52 (12), 1613-1619, 2010

2010

The effects of annealing phenomena on the energy absorption of roll-bonded Al–steel sheets during wedge tearing

R Beygi, M Kazeminezhad

Materials Science and Engineering: A 527 (27), 7329-7333, 2010

2010

Constrained groove pressing of low carbon steel: nano-structure and mechanical properties

F Khodabakhshi, M Kazeminezhad, AH Kokabi

Materials Science and Engineering: A 527 (16), 4043-4049, 2010

2010

Modeling of induced empirical constitutive relations on materials with FCC, BCC, and HCP crystalline structures: severe plastic deformation

M Kazeminezhad, E Hosseini

The International Journal of Advanced Manufacturing Technology 47 (9), 1033-1039, 2010

2010

Integration of physically based models into FE analysis: homogeneity of copper sheets under large plastic deformations

E Hosseini, M Kazeminezhad

Computational Materials Science 48 (1), 166-173, 2010

2010

Optimum groove pressing die design to achieve desirable severely plastic deformed sheets

M Kazeminezhad, E Hosseini

Materials & Design 31 (1), 94-103, 2010

2010

A Dislocation-Based Model Considering Free Surface Theory Through HPT Process: Nano-Structured Ni

E Hosseini, M Kazeminezhad

SCIENTIA IRANICA 17 (1), 52-59, 2010

2010

ETMB model investigation of flow softening during severe plastic deformation

E Hosseini, M Kazeminezhad

Computational Materials Science 46 (4), 902-905, 2009

2009

Influence of deformation during T10 treatment on microstructure/hardness/electrical conductivity of Cu–Cr alloy produced in nonprotected atmosphere

E Hosseini, A Habibollahzadeh, M Erfanmanesh, H Mostajabodave, ...

Materials Science and Technology 25 (10), 1283-1288, 2009

2009

The effects of intermediate and post-annealing phenomena on the mechanical properties and microstructure of constrained groove pressed copper sheet

E Rafizadeh, A Mani, M Kazeminezhad

Materials Science and Engineering: A 515 (1), 162-168, 2009

2009

On the evolution of flow stress during constrained groove pressing of pure copper sheet

E Hosseini, M Kazeminezhad, A Mani, E Rafizadeh

Computational Materials Science 45 (4), 855-859, 2009

2009

Dislocation structure and strength evolution of heavily deformed tantalum

E Hosseini, M Kazeminezhad

International Journal of Refractory Metals and Hard Materials 27 (3), 605-610, 2009

2009

A comparison of low carbon steel and Al–Mg alloy sheets in quasi-static tearing collisions

M Kazeminezhad

Materials & Design 30 (4), 1333-1336, 2009

2009

Stress-based model on work hardening and softening of materials at large strains: corrugation process of sheet

E Hosseini, M Kazeminezhad

Journal of materials science 44 (5), 1212-1218, 2009

2009

A hybrid model on severe plastic deformation of copper

E Hosseini, M Kazeminezhad

Computational Materials Science 44 (4), 1107-1115, 2009

2009

Modeling nano-scale grain growth of intermetallics

M Kazeminezhad

Bulletin of Materials Science 32 (1), 19-21, 2009

2009

Combination of the upper bound and potts models for simulation of microstructure in wire drawing and annealing processes

M Kazeminezhad

Journal of materials engineering and performance 18 (1), 26-31, 2009

2009

The effect of ECAP die shape on nano-structure of materials

E Hosseini, M Kazeminezhad

Computational Materials Science 44 (3), 962-967, 2009

2009

Monte Carlo simulation of recrystallization with hardness input of cold worked metal

M Kazeminezhad

Materials Science and Engineering: A 496 (1), 389-392, 2008

2008

Coupling kinetic dislocation model and Monte Carlo algorithm for recrystallized microstructure modeling of severely deformed copper

M Kazeminezhad, E Hosseini

Journal of materials science 43 (18), 6081-6086, 2008

2008

Simulation the ultra-fine microstructure evolution during annealing of metal processed by ECAP

M Kazeminezhad

Computational Materials Science 43 (2), 309-312, 2008

2008

On the modeling of the static recrystallization considering the initial grain size effects

M Kazeminezhad

Materials Science and Engineering: A 486 (1), 202-207, 2008

2008

The effect of 3D and 2D deformations on flattened wires

M Kazeminezhad, AK Taheri

Journal of Materials Processing Technology 202 (1), 553-558, 2008

2008

A study on the cross-sectional profile of flat rolled wire

M Kazeminezhad, AK Taheri, AK Tieu

Journal of materials processing technology 200 (1), 325-330, 2008

2008

Relationship between the stored energy and indentation hardness of copper after compression test: models and measurements

M Kazeminezhad

Journal of materials science 43 (10), 3500-3504, 2008

2008

A study on the computation of the redundant deformation factor in wire drawing of austenitic 304 stainless steel

M Kazeminezhad

journal of materials processing technology 199 (1), 230-233, 2008

2008

Deformation inhomogeneity in flattened copper wire

M Kazeminezhad, AK Taheri

Materials & design 28 (7), 2047-2053, 2007

2007

Modeling the effect of redundant strain factor on the microstructure inhomogeneity of drawn and annealed wire

M Kazeminezhad

Journal of Computer-Aided Materials Design 14 (3), 435-446, 2007

2007

Utilization of the finite element and Monte Carlo model for simulating the recrystallization of inhomogeneous deformation of copper

M Kazeminezhad, AK Taheri, AK Tieu

Computational materials science 38 (4), 765-773, 2007

2007

The prediction of macroscopic shear bands in flat rolled wire using the finite and slab element method

M Kazeminezhad, AK Taheri

Materials letters 60 (27), 3265-3268, 2006

2006

Computer simulation of the effect of post annealing parameters on the microstructure inhomogeneity of the non-uniformly deformed copper

M Kazeminezhad, AK Taheri, AK Tieu

Journal of computer-aided materials design 13 (1-3), 221-232, 2006

2006

Applicability of the FSEM for analyzing wire flat rolling process

M Kazeminezhad, A Karimi Taheri

Engineering computations 23 (5), 515-524, 2006

2006

Calculation of the rolling pressure distribution and force in wire flat rolling process

M Kazeminezhad, AK Taheri

Journal of materials processing technology 171 (2), 253-258, 2006

2006

A theoretical and experimental investigation on wire flat rolling process using deformation pattern

M Kazeminezhad, AK Taheri

Materials & design 26 (2), 99-103, 2005

2005

An experimental investigation on the deformation behavior during wire flat rolling process

M Kazeminezhad, AK Taheri

Journal of Materials Processing Technology 160 (3), 313-320, 2005

2005

Prediction of ferrite grain size and tensile properties of a low carbon steel

M Kazeminezhad, A Karimi Taheri

Materials science and technology 20 (1), 106-110, 2004

2004

The effect of controlled cooling after hot rolling on the mechanical properties of a commercial high carbon steel wire rod

M Kazeminezhad, AK Taheri

Materials & design 24 (6), 415-421, 2003

2003