France: very good in verbal and written communication skill.
English: medium in verbal and written communication skill.
Educational Background:
Ph.D. in Materials Science and Engineering, 1981, I.N.S.A. Lyon, France.
M.Sc. in Solid State Physics, 1975, University of Lyon, France.
B.Sc. in Physics, 1973, Tabriz University, Iran.
Professional Background: Mechanical Properties of Metals and Composites, Solid State Physics.
Courses Thought: Theory of Dislications, Mechanical Properties of Materials I, Fundamentals of Materials Science & Engineering.
Publications:
Peer-Reviewed Conference Papers, Journal Papers:
1-
A. Vincent, S.M. Seyed Reihani and J. Perez, “The Nature of
Dislocation-Pinning Defects in Cold-Worked Aluminum Studied by
Ultrasonic Waves”, Phys. Stat. Sol. (a) 39, (1977), 651
2- S.M. Seyed
Reihani, C. Esnouf and G. Fantozzi, “Determination of Dislocation
Pinning and Depinning Stages in Cold-Worked Copper”, Script. Met. 1,
(1978), 627-631
3- S.M. Seyed
Reihani, C. Esnouf, G. Fantozzi and G. Revel, “Frottenent Interieur
D’un Magnesium de Haute Purete’ Deforme Plastiquement”, J. de phys.
Lettres 39, (1978), L-429
4- S.M. Seyed
Reihani, G. Fantozzi, C. Esnouf and G. Revel, “Behavior of the Bordoni
Relaxation in a High Purty Magnesium after Plastic Deformation”,
Script. Met. 13, (1979), 1011-1015.
5- G. Fantozzi,
S.M. Seyed Reihani, C. Esnouf and G. Revel, “Internal Friction of High
Parity Magnesium after Plastic Deformation”, Proceeding of the Tird
European Conference, University of Manchester England, 18-20 July
(1980).
6- S.M.
Seyed Reihani, C. Esnouf, G. Fantozzi and G. Revel, “Effect of
Impurities on the Internal Friction Spectrum of Magnesium after Plastic
Deformation”, ICIFUAS-7 (International Conference) 6-9 July 1981,
Lausanne Switzerland.
7- A. Vincent,
S.M. Seyed Reihani, G. Fanozzi and J. Perez, “Dislocation – Point
Defects Interaction in Magnesium”, ICIFUAS-7 (International
Conference), 6-9 July 1981, Lausanne Switzerland.
8- G. Fantozzi,
C. Esnouf, S.M. Seyed Reihani and G. Revel, “ Anelastic Behaviour of
Plastically Deformed High Urity Magnesium Between 10 and 500K”, Acta
metall. Vol. 32, No. 12, (1984), 217S-2183.
9- P. Merle, D.
Dafir, S.M. Seyed Reihani, “Study of the Influence of the Reinforcement
on Precipitation Kinetics in Al 6061/SiCp”, Procee. Of the Ninth
International Conference on Composite Materials (ICCM/9) Madrid 12-16
July (1993).
10- S.M. Seyed
Reihani, D. Dafir and P. Merle, “Experimental Analyses of the
Acceleration of ß? Precipitation in a 6061/SiCp Composite”, Script.
Met. Et Mat. 28, (1993), 639-644.
11- S.M. Seyed
Reihani, “Study of the Enhanced Precipitation of an Aluminum 6061 Alloy
Reinforced by SiC Particles in the Rang of beta-prime Phase
Temperature”, J. of Eng. Islamic Rep. of Iran, 8, (1995), 55.
12- S.M. Seyed
Reihani, A. Karimi Taheri and A. Khodadad Motarjemi, “The Effects of
Aging Treatment on the Shape Memory Property of a Copper based Alloy”,
THERMEC’97, International Conference on Thermo mechanical Processing of
Steels and other Materials, University of Wollongong, Australia 7-11
July (1997), 1713.
13- H.M. Madaah
Hosseini, M. Akhavan, S.M. Seyed Reihani, H. Yoozbashi Zadeh and A.
Kianvash, “A New Composition for Binary Alloy Arocesing of Nd-Fe-B
Sintered Magnets”, Conf. PM Auto 99, Isfahan, Iran.
14- H.R. Madaah
Hosseini, S.M. Seyed Reihani and H. Yoozbashi Zadeh, “Microstructure –
Properties Relationship of (Fe, Nd-B) Permanent Magnets Processed by
Binary Alloy Method”, Conf. P.M. Auto 99, Isfahan, Iran Accepted: ISME
2000 Sharif University, Tehran, Iran.
15- H.R. Madaah
Hosseini, S.M. Seyed Reihani, H. Yoozbashi Zadeh and M. Akhavan, “The
Influence of Heat Treatment on the Microstructure and Magnetic
Properties of (Nd11.9MM2.8) (Fe73.9Co3.3 Ni1.1) B6Magnets”, Conf.
M.SM-99 Tehran-Iran.
16- H.R. Madaah
Hosseini, A. Kianvash, S.M. Seyed Reihani and H. Yoozbashi Zadeh,
“Production of (Nd, MM)2(Fe, Co, Ni)14 B-type Sintered Magnets Using a
Binary Powder Blending Technique”, J. of Alloys and Compounds 298,
(2000), 319-323.
17- H.R. Madaah
Hosseini, A. Kianvash, S.M. Seyed Reihani and H. Yoozbashi Zadeh,
“Binary Powder Blending (B.P.B.T): An Effective Method in Production of
(Nd, MM)2(Fe, Co, Ni)14 B- type Corrosion Resistant Magnets”, Proc. Of
the Sixteenth International Workshop on Rare-Earth Magnets, The Japan
Institute of Metals, (2000).
18- H.R. Madaah
Hosseini, A. Kianvash, H. Yoozbashi Zadeh and S.M. Seyed Reihani, “A
Correlation between Intrinsic Coercivity - Electrical – Conductivity –
Thermal Treatment in a Nd11.9MM2.9Fe73.9Co3.3Ni6.9B6.9 – type Magnet”,
J. of Alloys and Compounds, 314, (2001), 251-256.
19- S.M.
Zebarjad, A. Lazzeri, R. Bagheri, S.M. Seyed Reihani and M. Forunchi,
“Role of the Interface on the Deformation Mechanism of Glass Fiber
Polypropylene Composites”, J. of Materials Science Letters, 21, (2002),
1007-1011.
20- H. Khorsand,
H. Yoozbashi Zadeh, S.M. Habibi, K. Janghorban, A. Nangir and S.M.
Seyed Reihani, “Carbon, Prosity and Fatigue in Sintered Steel”, Metal
Powder Report, Vol. 57, No. 4, (2002).
21- H. Khorsand,
S.M. Habibi, H. Yoozbashi Zadeh, K. Janghorban, S.M. Seyed Reihani, H.
Rahmani Seraji and M. Ashtari, “The Role of Heat Treatment on Wear
Behavior of Powder Metallurgy Low Alloy Steels”, J. of Materials and
Design, 23, (2002), 667-670.
22- H.
Khorsand, S.M. Habibi, H. Yoozbashi Zadeh, K. Janghorban and S.M. Seyed
Reihani, “Investigation of Microstructure and Fatigue Properties of Low
Alloy Sintered Steel by Heat Treatment”, P/M Science and Technology,
Vol. 4, No. 2, (2002), 18-22.
23- S.M.
Zebarjad, A. Lazzeri, R. Bagheri, S.M. Seyed Reihani and M. Forunchi,
“Fracture Mechanism under Dynamic Loading of Elastomer – Modified Poly
Propylene”, J. Material Letters, 57, (2003), 2733-2741.
24- S.M.
Zebarjad, R. Bagheri, S.M. Seyed Reihani and M. Forunchi,
“Investigation of Deformation Mechanism in Poly Propylene / Glass Fiber
Composites”, J. of Applied Polymer Science, 87, (2003), 2171-2176.
25- S.M.
Zebarjad, R. Bagheri, S.M. Seyed Reihani and A. Lazzeri, “Deformation,
Yield and Fracture of Eleslomer – Modified Poly Propylene”, J. of
Applied Polymer Science, 90, (2003), 3767-3779.
26- H. Khorsand,
S.M. Habibi, H. Yoozbashi Zadeh, K. Janghorban, S.M. Seyed Reihani and
H. Rahmani Seraji, “Fatigue of Sintered Steels (Fe-1.5Mo-3Mn-0.7C)”,
Materials and Structure 37, (2004), 335-341.
27- R. Ehsani and
S.M. Seyed Reihani, “Aging Behavior and Tensile Properties of Squeeze
Cast Al 6061/SiC metal matrix composites”, Scientia Iranica. Vol. 11,
No.4, (2004).
28- A.H.
Tavakoli, S.M. Seyed Reihani, A. Simchi, ‘Effect of Cyclic Compaction
on the Consolidation of Al/SiC Composite Powder”, Powder Metallurgy,
World Congress & Exhibiton, 17-21st October 2004, 599-604.
29- S.M. Seyed
Reihani, “Processing of Squeeze Cast Al 6061-30 Vol. % SiC Composites
and their Characterization”, J. Materials and Design, Vol. 27/3,
(2004), 216-222.
30- A.H.
Tavakoli, A. Simchi, and S.M. Seyed Reihani, “Study of the
Consolidation of Composite Powders under Monotonic and Cyclic Loading”,
Composite Science and Technology, (2004), submitted.
31. A. Nemati, B.
Amiri, A.A. Nourbakhsh, S.M. Seyed Reihnai, “The Effect of Atmosphere
and Alumina Additive on Clay Bonded Silicon Carbide Composites”, 106th
Annual Metting & Exposition of the American Ceramic Society, April
18-21, 2004, American.
32. S.
Esmaeelzadeh, A. Simchi, S.M. Seyed Reihani, “Development of P/M
AlSi7-SiC Composite Foams for Automotive Applications”, PM Auto “05”
(2005), 246-254.
33. A. H.
Tavakoli, A. Simchi, S.M. Seyed Reihani, “Study of the Compaction
Behavior of Composite Powders under Monotonic and Cyclic Loading”,
Composites Science and Technology 65, (2005), 2094–2104.
34. R. Ahmadi, A.
Simchi, A. Mahdavi, S.M. Seyed Reihani, “Synthesis of Silver and
Copper-Tin Alloy Nanopowders by Inert Gas Consolidation Method”,
Materials and Design, (2005).
35. R. Ahmadi, A.
Simchi, S.M. Seyed Reihani, “Production of Nanosilver Powder by the
Inert Gas Consolidation Method”, Amirkabir Journal of Science and
Technology, Vol. 16, (2005), 103-107.
36. Z. Razavi
Hesabi, A. Simchi, S. M. Seyed Reihani, “Structural Evolution during
Mechanical Milling of Nanometric and Micrometric Al2O3 Reinforced Al
Matrix Composites”, Materials Science and Engineering, Vol. A. 428,
(2006), 159-168.
37. S. M. Seyed
Reihani, “Processing of squeeze cast Al6061–30vol% SiC composites and
their haracterization”, Materials and Design 27, (2006), 216–222.
38. A. Hosseini
Monnazah, A. Simchi, S. M. Seyed Reihani, “Creep Behavior of Hot
Extruded Al-5% SiC Composite Powder”,
Powder Metallurgy World Congress, (2006), Korean.
39. S. A.
Hosseini Monnazah, A. Simchi, S. M. Seyed Reihani, “Creep Behavior of
Hot Extruded Al-5% SiC Composite Powder”, Materials Science Forum Vols.
534-536, (2007), 861-864.
40. Z. Razavi
Hesabi, A.Simchi, S. M. Seyed Reihani, F. Simancik, M. Balog, A. Csuba,
“Mechanical Properties of Al-Al2O3 Nanocomposite Produced by Mechanical
Milling and Powder Hot Extrusion”, Euro PM 2007- Miniaturization &
Nanotechnology in PM (2007), Frence.
41. Z. Razavi
Hesabi, A.Simchi, S. M. Seyed Reihani, “An Investigation on the Hot
Deformation of Al-5Vol% Al2O3 Nanocomposite”, KMCK 2007, Germany.
42. A. Simchi, R.
Ahmadi, S. M. Seyed Reihani and A. Mahdavi, “Kinetics and Mechanisms of
Nanoparticle Formation and Growth in Vapor Phase Condensation Process”,
Materials and Design, Vol. 28, (2007), 850-856.
43. Z. Razavi
Hesabi, S. Kamrani, A. Simchi, S. M. Seyed Reihani, “Effect of
Nanoscaled Reinforcement Particles on the Structural Evolution of
Aluminum Powder during Mechanical Milling”, Powder Metallurgy, (2007).
44. S. Kamrani,
A. Simchi, R. Riedel, S. M. Seyed Reihani, “Effect of Reinforcement
Volume Fraction on the Mechanical Alloying of Al-SiC Nanocomposite
Powder ”, Powder Metallurgy, (2007).
45. A. Simchi, S.
Kamrani, S. M. Seyed Reihani, “Processing of Al–SiC nanocomposite
powder by high-energy ball milling”, Journal of materials processing
technology, (2007).
46. H. Arami, A.
Simchi, S. M. Seyed Reihani, “Mechanical induced reaction in Al–CuO
system for in-situ fabrication of Al based nanocomposites”
Journal of Alloys and Compounds 465, (2008), 151–156
47. Z. Razavi
Hesabi1, M. Sanjari, A. Simchi, S. M. Seyed Reihani, F. Simancik,
“Effect of Alumina Nanoparticles on Hot Strength and Deformation
Behavior of Al-5vol% Al2O3 Nanocomposite: Experimental Study and
Modeling”, Journal of Nanoscience and Nanotechnology, Vol. 10, (2010),
2641–2645.
48. A. Hosseini
Monazzah, A. Simchi, S. M. Seyed Reihani, “Creep Behavior of Hot
Extruded Al-Al2O3 Nanocomposite Powder”, Materials Science and
Engineering, A 527, (2010), 2567–2571.
49. M. Jamali,
Kh. Farokhzadeh, R. Bagheri, S. M. Seyed Reihani, “Architecturally
modified Al–DRA composites: the effect of size and shape of the DRA
rods on fracture behavior” , J. Mater Sci (2010), 45:2852–2861.
50. Z. Razavi
Hesabi, S. M. Seyed Reihani, A. Simchi, F. Simancik, “Fabrication and
Characterisation of Ultrafine-grained Al-5vol% Al2O3 Nanocomposite”,
Int. J. Nanomanufacturing, in press, 2010.
51. S.M.R.
Mousavi Abarghouie, S. M. Seyed Reihani, “Aging Behavior of a 2024 Al
Alloy-SiCp Composite”, Materials & Design, Volume 31, Issue 5, May
(2010), 2368-2374.
52. S.M.R.
Mousavi Abarghouie, S. M. Seyed Reihani, “Investigation of Friction and
Wear Behaviors of 2024 Al and 2024 Al/SiCp Composite at elevated
Temperatures”, Journal of Alloys and Compounds, 501, (2010), 326-332.
53. M. Movahedi,
A.H. Kokabi, S. M. Seyed Reihani, H. Najafi “Mechanical and
Microstructural Characterization of Al-5083/St-12 Lap Joints Made by
Friction Stir Weldng”, Procedia Engineering 10, (2011), 3297-3303.
54. M. Movahedi,
A.H. Kokabi, S. M. Seyed Reihani, H. Najafi, “Effect of Tool Travel and
Ratation Speeds on Weld Zone Defects and Joint Strength of Aluminum
Steel Lap Joints Made by Friction Stir Welding”, Science and Technology
of Welding and Joining, Vol. 17, N. 2, (2011), 162-167.
55. M. Movahedi,
A. H. Kokabi, S. M. Seyed Reihani, “Investigation on the Bond Strength
of Al-1100/St-12 Roll Bonded Sheets, Optimization and
Characterization”, Materials and Design 32, (2011), 3143–3149.
56. M. Movahedi,
A. H. Kokabi, S. M. Seyed Reihani, “Investigation on the Friction Stir
Lap Welding of Aluminum to Aluminum Clad Steel Sheets”, Science and
Technology of Welding and Joining, (2012).
57. Afshin
Masoudi, Hamid Reza Madaah Hosseini, Seyed Morteza Seyed Reyhani,
Mohammad Ali Shokrgozar, Mohammad Ali Oghabian, Reza Ahmadi, “Long-term
investigation on the phase stability, magnetic behavior, toxicity, and
MRI characteristics of superparamagnetic Fe/Fe-oxide core/shell
nanoparticles”, International Journal of Pharmaceutics 439, Issues 1–2,
(2012), 28-40.
58. A. Hosseini
Monazzah, R. Bagheri, S.M. Seyed Reihani, “Investigating the effect of
rolling strain on fracture behavior of roll bonded Al6061 laminates
under quasi-static and dynamic loading”, Materials Science and
Engineering: A 558, (2012), 82–89.
59. M. Movahedi,
A.H. Kokabi, S.M. Seyed Reihani, W.J. Cheng, C.J. Wang, “Effect of
annealing treatment on joint strength of aluminum/steel friction stir
lap weld”, Materials & Design 44, (2013), 487–492.
60. H.
Pouraliakbar, A. Hosseini Monazzah, R. Bagheri, S. M. Seyed Reihani, G.
Khalaj, A. Nazari, M.R. Jandagh, “Toughness prediction in functionally
graded Al6061/SiCp composites produced by roll-bonding”, Ceramics
International 40, (2014), 8809–8825.
61. M. Movahedi,
A.H. Kokabi, S.M. Seyed Reihani, H. Najafi, S.A. Farzadfar, W.J. Cheng,
C.J. Wang, “Growth kinetics of Al–Fe intermetallic compounds during
annealing treatment of friction stir lap welds”, Materials
Characterization 90, (2014), 121–126.
62. A. Hosseini
Monazzah, H. Pouraliakbar, R. Bagheri, S.M. Seyed Reihani, “Toughness
behavior in roll-bonded laminates based on AA6061/SiCp composites”,
Materials Science and Engineering: A 598, (2014), 162–173.
63. E.Basiri Tochaee, H.R. Madaah Hosseini, S.M. Seyed
Raihani, "Fabrication of high strength in-situ Al-Al3
Ti nanocomposite by mechanical alloying and hot extrusion:
Investigation of fracture toughness", Materials Science & Engineering A 658,
(2016), 246-254.
64.
E.Basiri Tochaee, H.R. Madaah Hosseini, S.M.
Seyed Raihani, "On the fracture toughness behavior of in-situ
Al-Ti composites produced via mechanical alloying and hot extrusion",
Journal of Alloys and Compounds 681, (2016), 12-21.
Recent Persian Peer-Reviewed Conference Papers
1.
H.R. Hafizpour, A.Simchi, S.M.Seyed Reihani, “Analysis of the
Consolidation Behaviour of Aluminium/nano-SiC Composite Powders Using
Non-Linear Compaction Equation”, Proceedings of the 2nd Conference on
Nanostructures (NS2008), March 11-14, 2008, Kish University, Kish
Island, I.R. Iran.
2. Z. Razavi Hesabi, M. Sanjari, A. Simchi, S.M.
Seyed Reihani, “Effect of alumina nanoparticles on the hot deformation
behavior of aluminium”, Proceedings of the 2nd Conference on
Nanostructures (NS2008), March 11-14, 2008, Kish University, Kish
Island, I.R. Iran.
3. A.R. Sadeghi, A.M. Nasiri, A.H. Kokabi, S.M. Seyed
Reihnai, “Effect of Welding Parameters on Microstructure and Mechanical
Properties in Dissimilar Friction Stir Welding Between Magnesium and
Aluminum Alloys”, International Institute of Welding International
Congress on Welding & Joining, 30 November-3 December, 2009,
Tehran, Iran.